Feature of Reptile Egg Incubator Incubation Hatchery Machine

1.Automatic digital displaying and controlling, Auto-temperature, Auto-humidity, Auto-turning eggs and ventilating system, Auto-alarming.

2.can keep temperature within 6 hours blackout

3..Color steel plate appearance and aluminum alloy and removable shelf for putting and turning egg.

4.Color steel plate appearance and aluminum alloy and removable shelf for putting and turning egg.

5.Ventilation by vertical air moving fan controlled by an electrical motor

6.Heating controlled by electronic system with probe & display

7.Accuracy of control temperature : ±0.1

8.Hatchability above 95% ,Suitable for hatching all kinds of poultry and birds. CE and SGS Approved, three years warranty, 10-12years lifetime.

9.Each machine includes a set of chicken egg trays. if you need other egg trays, please advise. Can accommodate most species by simply changing egg trays.

10.One incubator includes the main controller, tank body, accessory equipment, 1 set egg trays, 1 piece egg tester and 1 piece hatching basket.

11.Double ventilation channel is 6cm for air circulation efficiently, the ventilation is uniform. Temperature is evenly.

12. Each level has 12cm,the inner space is large enough to guarantee the ventilation.  standard 45°egg-turning angel.

13. Incubator Controller has dehumidify fuction.

How to use Reptile Egg Incubator Incubation Hatchery Machine
1.The incubator usd AC 220V / 50HZ voltage work.In order to ensure the safety of use, require qualified electricians to install. Must be added leakage protection switch and voltage regulator in the front of the power supply. And must be connected to ground effectively

2.Power on 5 minutes --- Open the door breathable 2 minutes --- Close the door 10 minutes --- Open the door breathable 2 minutes --- close the door warming

3.Add warm water to the basin to prevent the humidification tube dry, burning basin, the water level need higher than the surface of the humidifying tube 2 ~ 3 cm without overflow basin. Use a correct thermometer and the machine's temperature sensor tied together, put into the machine.

4.Before putting eggs into incubator, hold down the "UP" button and not let it go, Untile the egg trays is level or forward oblique, easy to enter.

5.Clean and disinfect the inside of the machine with 0.2% potassium permanganate solution. Egg trays soaked in disinfectant to disinfection. Egg need disinfection as to conditions.After disinfection, put the big side of the eggs on the egg tray, preheated at room temperature for 2 to 4 hours, let the embryo adapt to temperature changes. The best time to put eggs into machine is part.