Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes

China Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes, Find details about China 0.2ml Tube, Dome-Shaped PCR Tube from Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes

Rnase/Dnase Free
Yes
Rcf
6000
Cap
Flat-Top/Dome-Shaped
Trademark
Biologix
Specification
0.2 ml
Origin
China
Rnase/Dnase Free
Yes
Rcf
6000
Cap
Flat-Top/Dome-Shaped
Trademark
Biologix
Specification
0.2 ml
Origin
China
Flat-top/Dome-shaped Sterile stable from -20ºC to 100ºC CE ISO  DNase, RNase, and endotoxin free    PCR Single Tubes

 
Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes
Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes
 
Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes
Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes

I. APPLICATIONS
1. Molecular biology
2. Cell centrifugation
3. Sample storage
4. Centrifugation of precipitates

II. FEATURES
1. Materials: Virgin polypropylene
2. Chemically resistant to alcohols and mild organic solvents
3. Transparent wall permits easy viewing of tube contents
4. Temperature range: stable from -20ºC to 100ºC
5. Tested to withstand centrifugation of 6,000 RCF in a fully supported rotor
6. Certified RNase & DNase Free
7. Extra transparent caps allow for RT-PCR applications

III. TUBE DESIGN
1. Available in 0.2ml version
2. Conical bottom design fits most standard floor model and table-top centrifuges
3. Thin walls to accelerate termperature transfer
4. Clearly visible with either clear or turbid samples

IV. CAP DESIGN
1.Available in flat-top design
2. Available in dome-shaped design

V. PACKAGING
1. 0.2ml single PCR tubes: 1,000 tubes/pack, 10 packs/case

VI. DESCRIPTION
Cat #VolumeColorCapSterileUnit
60-00820.2mlClearFlat-topNO1,000/Pack, 10 Bags/case

60-0182

0.2mlPinkFlat-topNO1,000/Pack, 10 Bags/case

60-0282

0.2mlGreenFlat-topNO1,000/Pack, 10 Bags/case

60-0382

0.2mlBlueFlat-topNO1,000/Pack, 10 Bags/case

60-0482

0.2mlYellowFlat-topNO1,000/Pack, 10 Bags/case
60-00020.2mlClearDome-shapedNO1,000/Pack, 10 Bags/case
60-01020.2mlPinkDome-shapedNO1,000/Pack, 10 Bags/case
60-02020.2mlGreenDome-shapedNO1,000/Pack, 10 Bags/case
60-03020.2mlBlueDome-shapedNO1,000/Pack, 10 Bags/case
60-04020.2mlYellowDome-shapedNO1,000/Pack, 10 Bags/case


Flat-Top/Dome-Shaped Sterile Stable From -20º C to 100º C CE ISO Dnase, Rnase, and Endotoxin Free PCR Single Tubes

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.