Top Quality Sand Making Rod Mill with Low Price
China Top Quality Sand Making Rod Mill with Low Price, Find details about China Sand Making Rod Mill, Rod Mill from Top Quality Sand Making Rod Mill with Low Price
Basic Info.
Model NO.
MB0918
Condition
New
Warranty
1 Year
After-sales Service
Spare Parts for Free
Trademark
Effort
Transport Package
Standard Export Package
Specification
10*2*2m
Origin
China
HS Code
8474209000
Model NO.
MB0918
Condition
New
Warranty
1 Year
After-sales Service
Spare Parts for Free
Trademark
Effort
Transport Package
Standard Export Package
Specification
10*2*2m
Origin
China
HS Code
8474209000
Product Desciption
Top Quality Sand Making Rod Mill with Low Price
Wet Type Rod Mill ,Rod Type Sand Making Machine :
rod Mill is widely used in sand and gravel industry building sand and gravel equipment, one of the widely used, its performance has reached international leading level, is currently the most effective, practical and reliable crushed stone machine. rod mill machine,rod mill price.
Rod mill application:
1. In the gravity and magnetic mining processing, the rod grinding mill is used to prevent over grinding.
2. Pre-grinding. Rod grinding mill is often used in primary grinding to grind material to 1-3mm with high efficiency. It could prepare fully for the next grinding.
3. To replace fine crushing. When processing soft or sticky ore, rod mill is used to replace fine crushing, which could effectively prevent crusher sealing material.
4. Artificial sand making,it is also one type of sand making machine.
5.Grinding materials with rods.
Rod grinding mill structure:
1. The tube part: there is a man's hole in tube that used for examining and repairing and changing liner.
2. The feeding part: used for feeding.
3. The discharging part: used for discharging proper product.
4. Main bearing part.
5. Driving part:
Of the three main types of rod mill, overflow, end discharge, and center discharge only the overflow mill is in common usage. Wet grinding rod mills are normally used in the mineral processing industry. Dry grinding is used in some areas; however, it is confronted with problems and should be avoided except where absolutely necessary. Rod mills operate at lower speed than ball mills since the rods are rolled and not cascaded. For an equivalent grind, a rod mill uses less steel than a ball mill because of the lower speed and better contact between the media and ore. The rod charge must be maintained in good working condition, and broken and worn rods must be removed. Rod mills usually require greater operator attention. It is important that the rods stay essentially parallel to one another. If rods become misaligned, grinding action is lost and, more importantly, rod tangles occur. Maximum rod length is limited to about 6.1 m (20 ft). This in turn limits the length, diameter, and capacity of rod mills. The heavier rods acting upon the lifters and liners result in greater wear on the mill liners.
Rod mills normally carry 35 to 65% rod charge by volume. The limits on charge level are (1) keeping the feed end trunnion open so that feed will get into the mill, and (2) keeping the rod charge low so rods will not work their way into discharge openings where they can cause rod tangling.
Main Technical Parameters of the rod mill:
Wet Type Rod Mill ,Rod Type Sand Making Machine :
rod Mill is widely used in sand and gravel industry building sand and gravel equipment, one of the widely used, its performance has reached international leading level, is currently the most effective, practical and reliable crushed stone machine. rod mill machine,rod mill price.
Rod mill application:
1. In the gravity and magnetic mining processing, the rod grinding mill is used to prevent over grinding.
2. Pre-grinding. Rod grinding mill is often used in primary grinding to grind material to 1-3mm with high efficiency. It could prepare fully for the next grinding.
3. To replace fine crushing. When processing soft or sticky ore, rod mill is used to replace fine crushing, which could effectively prevent crusher sealing material.
4. Artificial sand making,it is also one type of sand making machine.
5.Grinding materials with rods.
Rod grinding mill structure:
1. The tube part: there is a man's hole in tube that used for examining and repairing and changing liner.
2. The feeding part: used for feeding.
3. The discharging part: used for discharging proper product.
4. Main bearing part.
5. Driving part:
Of the three main types of rod mill, overflow, end discharge, and center discharge only the overflow mill is in common usage. Wet grinding rod mills are normally used in the mineral processing industry. Dry grinding is used in some areas; however, it is confronted with problems and should be avoided except where absolutely necessary. Rod mills operate at lower speed than ball mills since the rods are rolled and not cascaded. For an equivalent grind, a rod mill uses less steel than a ball mill because of the lower speed and better contact between the media and ore. The rod charge must be maintained in good working condition, and broken and worn rods must be removed. Rod mills usually require greater operator attention. It is important that the rods stay essentially parallel to one another. If rods become misaligned, grinding action is lost and, more importantly, rod tangles occur. Maximum rod length is limited to about 6.1 m (20 ft). This in turn limits the length, diameter, and capacity of rod mills. The heavier rods acting upon the lifters and liners result in greater wear on the mill liners.
Rod mills normally carry 35 to 65% rod charge by volume. The limits on charge level are (1) keeping the feed end trunnion open so that feed will get into the mill, and (2) keeping the rod charge low so rods will not work their way into discharge openings where they can cause rod tangling.
Main Technical Parameters of the rod mill:
Type | Cylinder specification (mm) | Cylinder (r/min) | Weight (t) | Material-in size (mm) | Material-out size (mm) | Capacity (t/h) | Power (kw) | Overall dimension (L*W*H) (mm) | Weight (kg) | |
| Diameter | Length | |||||||||
| MB0918 | 900 | 1800 | 29.0-31.3 | 2.3 | <25 | 0.16-5 | 1.6-6 | 22 | 5900*2365*2015 | 6200 |
| MB0924 | 900 | 3400 | 29.0-35.4 | 3.1 | <25 | 0.16-5 | 2.9-10 | 30 | 5250*2480*2127 | 6600 |
| MB1224 | 1200 | 2400 | 27.0-34.0 | 6.5 | <25 | 0.16-5 | 5.0-13 | 55 | 5829*2867*2540 | 13500 |
| MB1530 | 1500 | 3000 | 26.5-29.5 | 11.5 | <25 | 0.16-5 | 6.0-25 | 95 | 7635*3329*2749 | 18170 |
| MB1830 | 1800 | 3000 | 21.6-22.8 | 17.5 | <25 | 0.16-5 | 4.8-28 | 155 | 8007*3873*3023 | 35000 |
| MB2130 | 2100 | 3000 | 19.0-21.0 | 23.5 | <25 | 0.16-5 | 12.6-30 | 155 | 9000*2800*3800 | 43000 |
| MB2136 | 2100 | 3600 | 19.0-21.0 | 23.2 | <25 | 0.16-5 | 15.1-45 | 210 | 9600*2800*3800 | 58000 |
| MB2736 | 2700 | 3600 | 17.2-18.5 | 47.0 | <25 | 0.16-5 | 25.0-75 | 400 | 10870*6100*4950 | 71500 |
| MB2740 | 2700 | 4000 | 17.2-18.5 | 51.0 | <25 | 0.16-5 | 27.7-90 | 420 | 11500*6100*4950 | 73600 |
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece