Un-TF-II Hospital Use Portable IV Infusion Fluid Heater
China Un-TF-II Hospital Use Portable IV Infusion Fluid Heater, Find details about China Infusion Warmer, Liquid Warmer from Un-TF-II Hospital Use Portable IV Infusion Fluid Heater
Basic Info.
Model NO.
UN-TF-II
Group
Human and Veterinary
Needle
Without Needle
Syringe Use
Intramuscular Injection
Tube Size
3-4mm
Flow Rate
2-12ml/Min
Suitable Speed of Infusion Fluid
40-80 Drops/Min(2~5.3ml/Min)
MOQ
1
Power
AC 110V or AC 220V
N.W.
Smaller Than 600g
Veterinary
Optional
Trademark
UN, OEM
Transport Package
Carton
Specification
36.5*15.5*12.5cm
Origin
China
HS Code
90183900
Model NO.
UN-TF-II
Group
Human and Veterinary
Needle
Without Needle
Syringe Use
Intramuscular Injection
Tube Size
3-4mm
Flow Rate
2-12ml/Min
Suitable Speed of Infusion Fluid
40-80 Drops/Min(2~5.3ml/Min)
MOQ
1
Power
AC 110V or AC 220V
N.W.
Smaller Than 600g
Veterinary
Optional
Trademark
UN, OEM
Transport Package
Carton
Specification
36.5*15.5*12.5cm
Origin
China
HS Code
90183900
Product Desciption
Hospital use IV fluid warmer for infusion pump
Introduction:
In clinical conditions, the infusion fluid is often different with patient's body in terms of temperature, which may cause patient suffering hypothermia and mentality atrophic, and the same cause syndrome of hypodynamia easily, ague, spasm of blood vessel muscle, arthritis ache and stomachache, even threaten the life if seriously. If the transfused solution is preheated in order to reduce the temperature difference with the blood, the patient can feel better, and the drug can be easily dissolved in the solution, thus enhancing absorption.
Working principle
UN-TF-II Infusion Fluid Warmer is an indirect heating device(dry warmer) and can be used repeatedly. The transfused fluid is heated up when it passes the infusion tube and the Warmer conducts heat to the solution via the infusion tube.
Main features:
1. Environmental conditions of transportation and storage
4. Temperature controlling
a) Liquid temperature at the entrance: 15ºC~25ºC or 59 oF ~77 oF
b) Liquid temperature at the exit: 30ºC~41ºC or 86 oF ~105.8 oF(Note 1)
c) Displaying error of temperature: ≤ 2ºCor 3.6 oF(Note 2)
5. Safety: the power supply will be automatically cut off when the heating plate reaches 42ºC+2ºC or 107.6+3.6 oF. Meanwhile, the buzzer phone gives an alarm and red-guided light glimmers.
6. Suitable speed of infusion fluid: 40~80 drops/min (2~5.3ml/min)
7. Fuse:T500mAL250V Size:φ3.9X11mm
8. Max. Weight: <600g
Application:
Infusion heating
Factory show:
About us:
Payment:
TT, Paypal & Western union are all fine.
Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.
Contact person: Shirley
| Product name | Fluid warmer |
| Model | UN-TF-II |
Introduction:
In clinical conditions, the infusion fluid is often different with patient's body in terms of temperature, which may cause patient suffering hypothermia and mentality atrophic, and the same cause syndrome of hypodynamia easily, ague, spasm of blood vessel muscle, arthritis ache and stomachache, even threaten the life if seriously. If the transfused solution is preheated in order to reduce the temperature difference with the blood, the patient can feel better, and the drug can be easily dissolved in the solution, thus enhancing absorption.
Working principle
UN-TF-II Infusion Fluid Warmer is an indirect heating device(dry warmer) and can be used repeatedly. The transfused fluid is heated up when it passes the infusion tube and the Warmer conducts heat to the solution via the infusion tube.
Main features:
1. Environmental conditions of transportation and storage
A) Ambient temperature: -40~+55ºC
B) Relative humidity: ≤ 80%
2. Environmental conditions of operationB) Relative humidity: ≤ 80%
A) Ambient temperature: 5~40ºC
B) Relative humidity: ≤ 80%
C) Power supply: AC 110V±11V or AC 220V±23V
D) Frequency: 60Hz±1Hz or 50Hz±1Hz
3. Input power ≤ 70W4. Temperature controlling
a) Liquid temperature at the entrance: 15ºC~25ºC or 59 oF ~77 oF
b) Liquid temperature at the exit: 30ºC~41ºC or 86 oF ~105.8 oF(Note 1)
c) Displaying error of temperature: ≤ 2ºCor 3.6 oF(Note 2)
5. Safety: the power supply will be automatically cut off when the heating plate reaches 42ºC+2ºC or 107.6+3.6 oF. Meanwhile, the buzzer phone gives an alarm and red-guided light glimmers.
6. Suitable speed of infusion fluid: 40~80 drops/min (2~5.3ml/min)
7. Fuse:T500mAL250V Size:φ3.9X11mm
8. Max. Weight: <600g
Application:
Infusion heating
Factory show:
About us:
Shipping:
DHL, Fedex, TNT, UPS, EMS......
Which ever is convenient for you.
DHL, Fedex, TNT, UPS, EMS......
Which ever is convenient for you.
Payment:
TT, Paypal & Western union are all fine.
Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.
Contact person: Shirley
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......