China Copper Pipe Casting Machine Line for Air Condition, Find details about China Copper Pipe Casting Machine Line, Pipe Casting Machine Line for Air Condition from Copper Pipe Casting Machine Line for Air Condition
Main euqipments
1. Three-roll planetary mill ,Model:FXZJ-SG
Product description of three - roll planetary rolling mill
Technics Characteristic
1) High pressure down rolling mill, single channel extension coefficient can reach more than 16
2) Rolling deformation is reasonable, after rolling the state was homogeneous recrystallization equiaxed grains
3) Solar terms effect is perfect
4) Using horizontal continuous casting hollow tube billet, the outer diameter of the tube can reach φ120mm
5) High degree of automation and high production efficiency
Technical parameter
Model | Billet specifications | Specification after rolling | Annual output | The billet pipe weight |
FXZJ-SG60 | φ54*13 | φ30*1.8 | 2500 | 200 |
FXZJ-SG70 | φ71*18 | φ40*2.0 | 5000 | 400 |
FXZJ-SG90 | φ90*25 | φ48*2.5 | 12000 | 1000 |
FXZJ-SG120 | φ116*30 | φ60*3.0 | 25000 | 2000 |
2. Whirlwind milling machine
Technics Characteristic
1) A milling that completes the surface of the circular surface 0.3 ~ 0.5mm at one time feeding.
2) A milling that completes the surface of the circular surface 0.3 ~ 0.5mm in one feed.
3) Copper tube billet length in the 2 ~ 15m or even longer can be used
4) The billet feed can be adjusted at infinity
5) Three - blade adjustable milling surface
Technical parameter
Processing copper tube billet outer diameter: φ60 ~ φ120mm
Thickness of copper billet pipe: ≥ 8mm
Copper billet tube length: 10~30m
The thickness of the flaying circumference: 0.5±0.2mm
Speed: 0~2m/min
3. Crawler-type continuous drawing machine or CAM type combine drawing machine
Technics Characteristic
The FXLS series combined drawing machine is used to reduce the diameter and wall thickness of the mill and pilger mill. The pipe is hardened during drawing. This pull can reduce the pull - pull of the puller. Because of the hardness of the tube drawing, the tube can be drawn at high speed through a disc drawing machine.
Technical parameter
1) Maximum drawing force: 1st drawing 100kN, 2nd drawing 80kN, 3rd drawing 60kN.
2) Maximum drawing speed: 120m/min (3rd drawing)
3) Feed specifications: (φ43~φ50mm)X(2.0~2.5mm)
4) Equipment drive system: DC motor, Full digital controllable DC converting controlling system.
5) Total power: 450Kw
6) Total weight of equipment: 82 Tons
4.Inverted vertical plate drawing machine
FXDL-2200 vertical plate
Technical Parameter
Reel diameter:2200mm
Maximum drawing force:60kN, 80kN, 120kN, 150kN
Drawing speed range:0~1000m/min
Max.inlet spec: φ50X2.5mm
Min outlet spec: φ4X0.33mm
Max.Coil Weight:1200kg
Drawing material: copper
Main motor power:~500kW
Weight:90T
5.Online annealing unit
FXHT Copper online annealing unit
Technical Parameter
Total power:880kW~1200kW
Material spec: φ9~φ13mm
Operating speed:0~600m/min
6.Copper tube internal thread forming unit
Copper tube internal thread forming unit
Technical Parameter
Drawing method
High speed motor speed:18000RPM~35000RPM
Drawing speed:0~100m/min
internal thread forming speed:0~70m/min
Total power:55kw
7. Copper pipe rewinding machine
XR-JZS Series copper pipe precision rewinding machine
Characters:
Drive by AC motor, frequency control and other technologies, the with synchronous speed, synchronous tension.
Servo motor control
Pre-elliptical device and tension synchronization system to ensure that the correct outer diameter of the copper pipe.
Centralized spray lubrication system, sub-components lubrication, centralized circulation filter
Single winding and double winding mode available
Technical data:
Winding pipe size: φ4~φ19mm, φ10~φ35mm
Wingding pipe thickness: 0.3~1.5mm
Coiling speed: 0~500m/min
Min. Winding OD: φ610mm (24")
Allowance of winding machine:5mm
Width of roller: 150~400mm, 300~700mm
Maxi winding OD: φ1200mm
Coiler weight: ≤500kg~800kg
Total power: 100~160kW
8. Floor type annealing furnace
Pipe diameter:φ4~φ22mm
Annealing capacity:2.5~5T/H (typical tubeφ9.52X0.5mm)
Max. Heating temperature: 600ºC
Rated Power: 900~1500kW
9. Well type annealing furnace
1. OD of pipe: φ4-φ16mm
Pipe thickness: 0.35~1.2mm
2. ID of pipe coil: φ610mm
3. OD of pipe coil: φ800~φ1000mm
4. Weight of coil: ≤300Kg
5. Average weight of Copper pipe: 20T/D
6. Annealing capacity: 1000 kg
7. Annealing temperature: 300-600ºC
8. Cooling temperature: ≤55ºC
9. Quality of surface: bright, keep original copper color
Main Data of Furnace:
10. OD of furnace body: φ4220 mm
11. Height of furnace body: 3000 mm
12. Furnace chamber size: φ2950×2700mm
13. Heating area:
14. Internal furnace size: φ2950×2700mm
15. Max. Loading: 3000 kg
16. Heating furnace weight: about 10 t
17. Average cooling water capacity: 20m3/h
18. Water temperature: environment temperature.
19. Water pressure: 0.3 Mpa
20. Protective gas: Nitrogen
21. Purity: 99.99%
22. Max consumption: 2m3/min
23. Max pressure of nitrogen: 0.05 Mpa
24. Mixing motor power:7.5 kW
25. Vacuum pump power: 5.5 kW
26. Fan: two sets axial flow fan
27. Water pump power: 3 kW
28. Voltage supply:
Drive & heating 380v±10% 50Hz±5%
Measurement and control: 220v±10% 50Hz±5%
29. Heating power: 600 kW
30. Power for transmission and others: about 16 kW
1. Inquiry response within 24 hour. 2. Ensure every quotation is practical &customized according to your requirement. 3. Provide the design suggestions and layout plan for the clients workshop. 4. Provide the technical specification of the auxiliary facilities. 5. Provide professional proposal for the whole project. 6. Engeneers are available to serve the machines overseas. 7. Our factory always welcome to your visit. We can take you to visit our local customers. 8. Quality assurance: 12months except consumable parts. We devote to good performance, strong packing, mature service to satisfy our clients. |