Factory Price Black 120W Switching Power Supply Rps-U120s24
China Factory Price Black 120W Switching Power Supply Rps-U120s24, Find details about China Switching Power Supply, Switching Adapter from Factory Price Black 120W Switching Power Supply Rps-U120s24
Basic Info.
Model NO.
RPS-U120S24
Trademark
RIEVTECH
Specification
CE, RoHs,
Origin
Nanjing, China
Model NO.
RPS-U120S24
Trademark
RIEVTECH
Specification
CE, RoHs,
Origin
Nanjing, China
Product Desciption
120Watts Single Output Industrial DIN Rail Power Supply RPS-15-S Series
Features:
General Specification:
Mechanical Specification
Block Diagram 
Derating Curve
RPS-U120S24
Mounting method instruction
A1 is recommended output current
A2 is the allowed max output current (PSU lifetime is around half of A1)
RPS-U120S24:
Mounting D:
Mounting E:
Features:
Universal AC input range(90~264Vac)
High efficiency up to 89%
Built-in current limiting circuit
Output protections: OVP/OLP/SCPWide operating ambient temp (-25ºC~70ºC)
Built-in DC OK function
High efficiency up to 89%
Built-in current limiting circuit
Output protections: OVP/OLP/SCPWide operating ambient temp (-25ºC~70ºC)
Built-in DC OK function
Can be installed on TS-35/7.5 or 35/15
100% full load burn-in test
PCB with conformal coating
Suitable for critical applications
Operating altitude up to 6000m
PCB with conformal coating
Operating altitude up to 6000m
PCB with conformal coating
Ultra-slim,45mm width
3 years warranty
General Specification:
| MODEL | RPS-U120S12 | RPS-U120S24 | RPS-U120S48 | ||
| OUTPUT | DC Output | 12V | 24V | 48V | |
| Rated Current | 10A | 5A | 2.5A | ||
| Current Range Note 1 | 0~10A | 0~5A | 0~2.5A | ||
| Ripple and Noise Note 2 | 0~70ºC | ≤120mV | ≤120mV | ≤240mV | |
| -20ºC~0 | ≤240mV | ≤240mV | ≤480mV | ||
| Voltage ADJ. Range | 12~14V | 24~28V | 48~56V | ||
| Voltage Accuracy | ±1.0% | ||||
| Line Regulation | ±0.5% | ||||
| Load Regulation | ±1.0% | ||||
| Set-up Time | <1.2S@230Vac ; <3.0mS@115Vac | ||||
| Hold up Time | ≥10mS@115Vac; ≥20mS@230Vac Full load | ||||
| Temperature Coefficient | ±0.03%/ºC | ||||
| Overshoot and Undershoot | <5.0% | ||||
| INPUT | Voltage Range | 90Vac~264Vac, 127Vdc-370Vdc | |||
| Frequency Range | 47Hz~63Hz | ||||
| Efficiency ( Typical) | 85% | 88% | 89% | ||
| AC Current (max.) | <2.7 A/115VAC ; <1.35A/230VAC | ||||
| Inrush Current (Typical) | 20A/115Vac ; 35A/230Vac Cold start | ||||
| Leakage Current | Input-output:<0.25mA Input-PG:<3.5mA (264Vac input, 63Hz) | ||||
| PROTECTION | Over Load | 10.5~13A | 5.25~6.5A | 2.75~3.25A | |
| Protection type: Constant current | |||||
| Over voltage | 15~18V | 29~33V | 58~63V | ||
| Protection type: Shut down, re-power on. | |||||
| Over temperature | 100±5ºC, detect on heat sink of power transistor; shut down O/P, re-power on. | ||||
| Short Circuit | Long-term mode, auto recovery | ||||
| Operating amb.Temp.&Hum. | -20ºC~70ºC; 20%~90%RH No condensing (pls refer to derating curve) | ||||
| ENVIRONMENT | Storage Temp. & Hum. | -40ºC~85ºC; 5%~95%RH No condensing | |||
| Safety Standards | UL508, UL60950, EN60950 | ||||
| SAFETY &EMC Note 3 | Withstand Voltage | Primary-Secondary:3.0KVac/10mA. | |||
| Primary-PG:1.5KVac/10mA. | |||||
| Secondary-PG: 0.5KVac/10mA. | |||||
| Isolation Resistance | 10M ohms | ||||
| EMC Emission | Compliance to EN55022, EN55024, FCC PART 15 Class B | ||||
| Harmonic Current | Compliance to EN61000-3-2, CLASS A | ||||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level | ||||
| MTBF (MIL-HDBK-217F) | More than 500,000Hrs (25ºC, Full load) | ||||
| OTHERS | Dimension (L*W*H) | 124*119*45mm | |||
| Cooling method | Cooling by free air convection | ||||
| NOTE | 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25ºC of ambient temperature. 2. Measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 3. The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies" on www.rievtech.com. | ||||
Mechanical Specification
| 1.AC Screw terminal information | |||
| No. | Function | Wire Specs | Recommended torque |
| 1 | PE | 20-10AWG | 5Nm |
| 2 | N | ||
| 3 | L | ||
| 2.DC Screw terminal information | |||
| No. | Function | Wire Specs | Recommended torque |
| 4~6 | V+ | 20-10AWG | 5Nm |
| 7~9 | V- | ||
| AC/DC Terminal blocks | |
| Type | Screw terminal blocks |
| Solid Wire | 0.5-6mm2 |
| Strand Wire | 0.5-4mm2 |
| Wire Spec | AWG20-10 |
| Max Wire Diameter | 2.8mm |
| Recommended stripping length | 7mm |
| Screwdriver | 3.5mm Straight or Cross Screwdriver |
| Recommended Torque | 0.5NM |
Block Diagram
Derating Curve
RPS-U120S24
Mounting method instruction
A1 is recommended output current
A2 is the allowed max output current (PSU lifetime is around half of A1)
RPS-U120S24:
Mounting D:
Mounting E:
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......