Automated Filtration Efficiency Differential Pressure and Resistance Testing Equipment for Medical Plane Face Mask and Meltblown
China Automated Filtration Efficiency Differential Pressure and Resistance Testing Equipment for Medical Plane Face Mask and Meltblown, Find details about China Testing Euipment, Mask Testing Equipment from Automated Filtration Efficiency Differential Pressure and Resistance Testing Equipment for Medical Plane Face Mask and Meltblown
Basic Info.
Model NO.
SC-FT-1802D
Resistance Accuracy
1PA
Power
AC220V, 50 or 60 Hz
Mode Option
4 Modes
Trademark
Scince
Transport Package
Wooden Case
Specification
730*730*1480mm
Origin
Suzhou
Model NO.
SC-FT-1802D
Resistance Accuracy
1PA
Power
AC220V, 50 or 60 Hz
Mode Option
4 Modes
Trademark
Scince
Transport Package
Wooden Case
Specification
730*730*1480mm
Origin
Suzhou
Product Desciption
Automated Filtration Efficiency Differential Pressure and Resistance Testing Equipment for Medical Plane Face Mask and Meltblown
Application
This automated testing equipment is designed to test filter efficiency, resistance and differential pressure (Δ P) of medical face mask, especially suitable for the plane mask manufacturer to conduct usual quality control. it is developed in accordance with some industry standards including GB2626-2006, GB19083, YY0469, YY0969, NIOSH 42 CFR84 and EN149 etc.
Basic function
Three modes are optional to test filter efficiency.
Mode 1: to test the filter efficiency of particle smaller than 0.3μm.
Mode 2: to provide filter efficiency of particles in different sizes such as 0.3, 0.5, 1, 3μm at the same time.
Mode 3: to provide the filter efficiency of PM1.0 and PM2.5 at the same time.
Mode 4: to test differential pressure (ΔP) of medical face mask.
Key features
1. Flow is adjustable manually to test flow under different standards.
2. Touch screen is designed with human-computer interaction, visually displayed.
3. Calibrated with standard filter paper, the test result can be compared with TSI 8130.
4. Built-in printer, the result can be printed directly.
5. The report can be printed with A4 paper and remote calibration is available.
6. Simple operation, no special requirement for operator. No consumable, low cost for maintenance.
Testing equipment pictures
Company strength
Product deliver
1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.
2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.
3. What is your terms of payment?
Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.
4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.
5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.
6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for a small fee.
7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. Only accessories and corresponding shipping charges will be charged out of the warranty period.
8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.
Application
This automated testing equipment is designed to test filter efficiency, resistance and differential pressure (Δ P) of medical face mask, especially suitable for the plane mask manufacturer to conduct usual quality control. it is developed in accordance with some industry standards including GB2626-2006, GB19083, YY0469, YY0969, NIOSH 42 CFR84 and EN149 etc.
| Main Technical Parameter | |
| Aerosol | NaCl, Paraffin oil |
| Air flow | 8~95L/min |
| Test area | 100cm2/4.9 cm2 |
| Efficiency range | 20%~99.97% |
| Resistance range | 0~125Pa and 0~500Pa, optional |
| Flow rate accuracy | ±3% |
| Resistance accuracy | 1Pa |
| Power | AC220V, 50 or 60 Hz |
Basic function
Three modes are optional to test filter efficiency.
Mode 1: to test the filter efficiency of particle smaller than 0.3μm.
Mode 2: to provide filter efficiency of particles in different sizes such as 0.3, 0.5, 1, 3μm at the same time.
Mode 3: to provide the filter efficiency of PM1.0 and PM2.5 at the same time.
Mode 4: to test differential pressure (ΔP) of medical face mask.
Key features
1. Flow is adjustable manually to test flow under different standards.
2. Touch screen is designed with human-computer interaction, visually displayed.
3. Calibrated with standard filter paper, the test result can be compared with TSI 8130.
4. Built-in printer, the result can be printed directly.
5. The report can be printed with A4 paper and remote calibration is available.
6. Simple operation, no special requirement for operator. No consumable, low cost for maintenance.
Testing equipment pictures
Company strength
Product deliver
1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.
2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.
3. What is your terms of payment?
Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.
4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.
5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.
6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for a small fee.
7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. Only accessories and corresponding shipping charges will be charged out of the warranty period.
8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......