Application

Series gasoline vapor recovery vacuum pump is a relatively consummate pump for gasoline vapor recovery system, it can work between the temperature of minus 40 degrees and 60 degrees,and can be used atone or as a part of the system in gas stations.In the Gasoline vapor recovery system,the pump is mainly used for collecting gasoline vapor so to lower the pollution and save resources.As the environment pollution goes from bad to worse and the requirement for efficient use of resources persistently,gasoline vapor recovery vacuum pump will be used extensively in this area

Structure Character

The characteristics of WDOP Series gasoline vapor recovery vacuum pump as follows: There fixed a pump shaft that is driven by the electromotor and is connected by a brace to a pole that link to a piston which can move up and down freely in a bush inside the pump.Above the piston,there is a seat assembly which includes a non return inlet valve and outlet valves for the gasoline vapor,and the above mentioned valves are linked to the pump inlet and outlet chamber respectively.What we need to do is to connect the pump inlet chamber with a pipe to the vapor recovery adapter,and connect the adapter to the refueling nozzle with a soft,double wall tube


Model :WDQP-100    WDQP-53
Power :370    370 W
Rating suction capacity :100   53 L/min
High-point vacuum: -0.09   -0.09 MPa
Noise :62    62 dB(A)
Speed :2800    2800 RPM
Voltage :380±10%    380±10% V
Weight :18     15 KG
Dimension :L×W×H 450×163×205      310×163×205 mm
 

Maintenance

Casters must be fastened before using.Checking the wires to make sure they are sturdy(the ground wire also should be connected).Entering/Exhausting pipe's connections should be not of leakage. The piston bowl should be changed after the machine has worked for 5000 hours,but the piston must be in the same materials

Waring:Before going for any maintenance,the power must be cut off.

certificates