20FT 40FT Lifting Container Spreader Container Spreader Per Container
China 20FT 40FT Lifting Container Spreader Container Spreader Per Container, Find details about China Automatic Container Spreader, Semi Automatic Spreader from 20FT 40FT Lifting Container Spreader Container Spreader Per Container
Basic Info.
Model NO.
Enjue-1782
Dead Weight
3.5t
Trademark
China Enjue
Transport Package
Nude Package or as Your Required
Specification
20ft or 40ft
Origin
China
HS Code
8426194200
Model NO.
Enjue-1782
Dead Weight
3.5t
Trademark
China Enjue
Transport Package
Nude Package or as Your Required
Specification
20ft or 40ft
Origin
China
HS Code
8426194200
Product Desciption
Our company can produce 20feet/40feet semi-automatic spreader, telescopic spreader, hydraulic rotary spreader, and can provide spreader parts in time, such as plates and spin locks. Our design has been known for its high-productivity, its low maintenance costs.
Semi-automatic spreaders are fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit.
Specifications
Twist lock control is carried out mechanically by means of wire rope pulling.
It is fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit
Automatic container spreader without power
The spreader is equipped on 40t gantry crane to load and unload containers. The spreader is light, no power, easy to operate and cheap. There are two kinds of spreader 32t-20' and 40t-40'.
Operation: first put the four main lifting ropes riggings of the spreaders and one turning stretch wire rope in the hook of the gantry crane. Before lifting, the guider points to open direction. By the localizers at the four sides of the spreader and the skilled operation, the four turning locks of spreader are locked into the corner, and then the hook is started slowly. The stretch wire rope is firstly tight to pull turning mechanism and turn the turning lock in 90°and be closed, and then keep lifting the hook. The container is lifted.
Lay container down: After hanging containers to be scheduled position, keep the hook fall about 1-2m and then lift the hook again. Before the main lifting wire rope is dragged, lift turning rope to make turning lock back to open position and lift the hook to depart the spreader and container. By now the operation is finished.
Maintenance: The link pole of the spreader and turning mechanism should be opened to check regularly and add lubricating oil to make every part turn fluently. If there are obvious damages and distortion, spreader and wire rope should stop work at once.
Technical Specification
.Scope of supply
HS20 /HS40 GBM..,
One unit 20'/40' GBM automatic container spreader. It includes 4 steel wire ropes, which have rigging rings at the end of the steel wire ropes. The ends that connect with the crane have a concentrated ring.
. Overall Dimensions
. Technical Parameter
. Surface Treatment & Painting
1.
Flame dirt-remover, and then shot blasting.
2. 40µm,,80µm/40µm.
Primer coating (Epoxy resin paint) app. 40µm
Middle (Epoxy resin paint) app. 80µm
Top paint (Polyurethane paint) app. 40µm.
(),,
The top coat paint color is yellow. There is scutcheon with the main specifications, manufacture date and exfactory number.
. Technical Documents
,:
When delivering, the seller provides:
drawings of the spreader& quick-wear parts
()Operation Manual
Certificate of Quality
. Parts Introduction
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders 20'&40'
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Automatic Operation
. Spreader Characteristics
1. ,,,.
The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting
2. ,,.
Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
HS20'/ HS40',,,,.
HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock, manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot
. Safety Test
1. 150%.
Each spreader should be carried out 150% static load test before delivering.
2. .
All the lifting eyes should be carried out safety test.
3. 25.
Each twist lock should be carried out 25t safety test.
.Safety Protection
1. ,.
When the spreader lifts container, the load should not exceed the max. SWL.
2. ,.
When using the spreader, using design function only.
3. .
Person shouldn't stand under the lifting spreader.
,,.,.
After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.
.Repair and Maintenance
() Twist lock
1. (ZG-3),.
Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2. (ZG-3).
Hinge point of the connecting rod should be lubricated frequently.
3. ,.
After operation, please check if there are damages on the twist lock.
(ZG-3).
Bearing block of the connecting rod should be lubricated frequently.
()
1. 50250,,.
After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating parts should be lubricated.
2. 1001500.,.,,.
After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened. If loose, please fasten again.
3. 100015000,.
After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4. 1500,25000,.
After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a)
Disassemble all the four twist lock structures.
b) ,.
If any problem, please replaced accordingly.
c) .
Washing all the parts.
d) .
Install the four twist lock structures.
5. 3000,50000,.(),.
After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if there are cracks or other faults, please replace timely.
6000.100000,,.
After 6000 hours' operation or lifting 100000 containers, please replace the twist
lock structure.
Pics reference
Semi-automatic spreaders are fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit.
Specifications
Twist lock control is carried out mechanically by means of wire rope pulling.
It is fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit
Automatic container spreader without power
The spreader is equipped on 40t gantry crane to load and unload containers. The spreader is light, no power, easy to operate and cheap. There are two kinds of spreader 32t-20' and 40t-40'.
Operation: first put the four main lifting ropes riggings of the spreaders and one turning stretch wire rope in the hook of the gantry crane. Before lifting, the guider points to open direction. By the localizers at the four sides of the spreader and the skilled operation, the four turning locks of spreader are locked into the corner, and then the hook is started slowly. The stretch wire rope is firstly tight to pull turning mechanism and turn the turning lock in 90°and be closed, and then keep lifting the hook. The container is lifted.
Lay container down: After hanging containers to be scheduled position, keep the hook fall about 1-2m and then lift the hook again. Before the main lifting wire rope is dragged, lift turning rope to make turning lock back to open position and lift the hook to depart the spreader and container. By now the operation is finished.
Maintenance: The link pole of the spreader and turning mechanism should be opened to check regularly and add lubricating oil to make every part turn fluently. If there are obvious damages and distortion, spreader and wire rope should stop work at once.
Technical Specification
.Scope of supply
HS20 /HS40 GBM..,
One unit 20'/40' GBM automatic container spreader. It includes 4 steel wire ropes, which have rigging rings at the end of the steel wire ropes. The ends that connect with the crane have a concentrated ring.
| Item | 20' | 40' |
| Max. SWL | ≈ 35 t | ≈40 t |
| Dead Weight | ≈1.8t | ≈3.1t |
. Overall Dimensions
| Item | 20' | 40' |
| (): Distance between lock centers(length) | ≈ 5853 mm | ≈11985 mm |
| (): Distance between lock centers(width) | ≈ 2260 mm | ≈2260 mm |
| : Overall Length | ≈ 6058 mm | ≈12188 mm |
| : Overall Width | ≈ 2610 mm | ≈2610 mm |
| : Frame Height | ≈ 636 mm | ≈731 mm |
. Technical Parameter
| Item | 20' | 40' |
Dia. of pressed wire rope slings | 32 mm | 36 mm |
Length of pressed wire rope slings | 3.5m per piece (4 pieces for each set) | 8.5m per piece (4 pieces for each set) |
Steel Frame | Material Q345B | Material Q345B |
ISO Standard Fixed Twist Lock | Material 42CrMo | Material 42CrMo |
Twist Lock Device | Finish the Twist locks action via semi-automatic Elastic lasso | Finish the Twist locks action via semi-automatic Elastic lasso |
. Surface Treatment & Painting
1.
Flame dirt-remover, and then shot blasting.
2. 40µm,,80µm/40µm.
Primer coating (Epoxy resin paint) app. 40µm
Middle (Epoxy resin paint) app. 80µm
Top paint (Polyurethane paint) app. 40µm.
(),,
The top coat paint color is yellow. There is scutcheon with the main specifications, manufacture date and exfactory number.
. Technical Documents
,:
When delivering, the seller provides:
drawings of the spreader& quick-wear parts
()Operation Manual
Certificate of Quality
. Parts Introduction
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders 20'&40'
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Automatic Operation
. Spreader Characteristics
1. ,,,.
The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting
2. ,,.
Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
HS20'/ HS40',,,,.
HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock, manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot
. Safety Test
1. 150%.
Each spreader should be carried out 150% static load test before delivering.
2. .
All the lifting eyes should be carried out safety test.
3. 25.
Each twist lock should be carried out 25t safety test.
.Safety Protection
1. ,.
When the spreader lifts container, the load should not exceed the max. SWL.
2. ,.
When using the spreader, using design function only.
3. .
Person shouldn't stand under the lifting spreader.
,,.,.
After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.
.Repair and Maintenance
() Twist lock
1. (ZG-3),.
Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2. (ZG-3).
Hinge point of the connecting rod should be lubricated frequently.
3. ,.
After operation, please check if there are damages on the twist lock.
(ZG-3).
Bearing block of the connecting rod should be lubricated frequently.
()
1. 50250,,.
After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating parts should be lubricated.
2. 1001500.,.,,.
After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened. If loose, please fasten again.
3. 100015000,.
After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4. 1500,25000,.
After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a)
Disassemble all the four twist lock structures.
b) ,.
If any problem, please replaced accordingly.
c) .
Washing all the parts.
d) .
Install the four twist lock structures.
5. 3000,50000,.(),.
After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if there are cracks or other faults, please replace timely.
6000.100000,,.
After 6000 hours' operation or lifting 100000 containers, please replace the twist
lock structure.
Pics reference
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......