High Speed Fiber Optic Module SFP Module Optical Transceiver

China High Speed Fiber Optic Module SFP Module Optical Transceiver, Find details about China SFP Module, Fiber Transceiver from High Speed Fiber Optic Module SFP Module Optical Transceiver

Model NO.
SFP-10G-LR-20
Trademark
wseelaser
Specification
57.5*14.3*12.7mm
Origin
Shandong
HS Code
8517622990
Model NO.
SFP-10G-LR-20
Trademark
wseelaser
Specification
57.5*14.3*12.7mm
Origin
Shandong
HS Code
8517622990
High Speed Fiber Optic Module SFP Module Optical TransceiverHigh Speed Fiber Optic Module SFP Module Optical TransceiverSFP+ transceivers, according to Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable "SFP+" Multi-Sourcing Agreement (MSA) SFF-8431 and SFF-8472, revision 10.4, are designed for 10G Ethernet serial optical data communication up to 20km on multimode fiber.
Features 
  1. Supports up to 11.3Gb/s bit rates
  2. Duplex LC connector
  3. Hot pluggable SFP+ footprint
  4. Uncooled 1310nm DFB transmitter, PIN photo-detector
  5. Applicable for 20km SMF connection
  6. Low power consumption, < 1W
  7. Digital Diagnostic Monitor Interface
  8. Optical interface compliant to IEEE 802.3ae 10GBASE-LR
  9. Electrical interface compliant to SFF-8431
  10. Operating case temperature:
Commerical:0 to 70 °C
Industrial:-40 to 85 °C



High Speed Fiber Optic Module SFP Module Optical TransceiverHigh Speed Fiber Optic Module SFP Module Optical Transceiver
Transmitter Operating Characteristic-Optical, Electrical
ParameterSymbolMin.TypicalMax.UnitNote
Centre WavelengthλC126013101355nm 
Spectral WidthPm--1nm 
Laser Off PowerPoff---30dBmNote1
Average Optical PowerPavg-3-1dBmNote1
Extinction RatioER44.5-dBNote2
Transmitter Dispersion PenaltyTDP--3.2dB 
Relative Intensity NoiseRIN12OMA---128dB/Hz 
Optical Return Loss ToleranceORLT--12dB 
Side Mode Suppression Ratio  SMSR30--dB 
Operating Data RateGb/s2.4576-10.7Gbps 
Optical Eye Mask%5--%Note2
Tx Input Diff. VoltageVI180-700mV 
Tx FaultVoL0-0.8V 
VoH2.0 Vcc+0.3  
Eye Diagram  IEEE Std 802.3-2005 10Gb Ethernet 10GBASE-LR compatible
Notes:
[1] The optical power is launched into 9/125µm SMF.
[2] Measured with a PRBS 231 -1 test pattern @10.3125Gbps
Receiver Operating Characteristic-Optical, Electrical
ParameterSymbolMin.Typ.Max.UnitNote
Center Wavelengthλr1260-1355nm 
Receive Sensitivity In Average PowerPsen---14.4  dBmNote1
Stressed Receiver Sensitivity In OMA ---10.3dBmNote2
Los AssertLosA-30--dBm 
Los DessertLosD---16dBm 
Los HysteresisLosH0.5--dB 
Receiver Overload (P avg )  P OL0.5--dBmNote1
Notes:
[1] Measured with PRBS 231 -1 test pattern, 10.3125Gb/s, BER<10-12 
[2] Comply with IEEE 802.3-2005.
[3] The wavelength 1411/1431/1451nm need to use dispersion compensating fiber(DCF) can up to 10km, Else,
1411/1431/1451nm can up to 15km;

High Speed Fiber Optic Module SFP Module Optical TransceiverHigh Speed Fiber Optic Module SFP Module Optical Transceiver