Products

Virgin and Recycled Injection Grade Polypropylene/ PP Plastic Material

China Virgin and Recycled Injection Grade Polypropylene/PP Plastic Material, Find details about China PP, Plastic from Virgin and Recycled Injection Grade Polypropylene/PP Plastic Material

Grade
Injection
Trademark
sinopec
Transport Package
25kg/Bag
Specification
COA
Origin
China
HS Code
3902100090
Grade
Injection
Trademark
sinopec
Transport Package
25kg/Bag
Specification
COA
Origin
China
HS Code
3902100090
Virgin and Recycled Injection Grade Polypropylene/PP Plastic MaterialVirgin and Recycled Injection Grade Polypropylene/PP Plastic MaterialVirgin and Recycled Injection Grade Polypropylene/PP Plastic MaterialVirgin and Recycled Injection Grade Polypropylene/PP Plastic MaterialVirgin and Recycled Injection Grade Polypropylene/PP Plastic MaterialPolypropylene
HS Code:3902100090
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.

PP Features
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4, good chemical properties, almost no water absorption, and does not react with most chemicals.
5, the texture is pure, non-toxic.
6, electrical insulation is good.

2.Specification:
NumberProjectUnitH40STest valueTest Methods
1Melt mass-flow rate(MFR)Nominal valueg/10min3737.3GB/T 3862
Deviation±37
2Isotactic index %>=96.097.51GB/T 2412
3Particle appearanceColor grainPc/kg<=50SH/T 1541-2006
Black grainPc/kg00
Large and small grainsg/kg<=1000.1
Snake skin grains and trailing grainsPc/kgreport25
4Impurities and others Pc/kgnonoSH/T 1541-2006
5Ash %<=0.0300.014GB/T 9345.1
6Tensile propertiesTensile modulus of elasticity(Et) MPa >=12001250GB/T 1040  
Tensile yield stress(σ y) MPa >=30.030.9
Tensile stress atbreak(σ B) MPa >=8.020.7
Nominal tensile strain at break(ε tB) % >=200566
Test conclusionQualified

3.Application:
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)

4.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement

25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container

You Might Also Like