24V BMS 8S 80A 100A 120A 200A PCM for 3.2V LiFePO4 Lithium Battery for Electric Bicycle Scooter Protection Circuit Board

1.Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

2.Strong load ability, constant discharge current 10A/25/35A/45A/60A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

3.IC itself has power balancing function. The circuit is simple and reliable.

4.Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection

function is very reliable.Long time short circuit of the load won't affect the PCB and the battery.Temperature protection during charging and discharging.

5.Extreme low power consumption. The consumption of the whole device is less than 50uA.

6.PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

7.CE approved ,Customize service, like cable,length ,logo, current of bms

 1.How to test the bms is good or not ?

2,How to connect the bms with battery pack ? 

 2,What's the differences between separate port and common port  ? 

3.How to choose the bms for  lithium ion ,lipo ,liFepo4 Battery pack ?