pH Sensor for Wasterwater, Drinking Water (pH8012)

China pH Sensor for Wasterwater, Drinking Water (pH8012), Find details about China pH Sensor, pH Electrode from pH Sensor for Wasterwater, Drinking Water (pH8012)

Model NO.
PH8012
Connection
Low-Noise Cable Goes out Directly.
Trademark
BOQU
Transport Package
Carton Box
Specification
SGS, CE, ISO9001
Origin
Shanghai
HS Code
9027809900
Model NO.
PH8012
Connection
Low-Noise Cable Goes out Directly.
Trademark
BOQU
Transport Package
Carton Box
Specification
SGS, CE, ISO9001
Origin
Shanghai
HS Code
9027809900
Principle
In PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose role is to transfer chemical energy into electrical energy. The voltage of the battery is called the electromotive force (EMF). This electromotive force (EMF) is composed of two half-batteries. One half-battery is called the measuring electrode, and its potential is related to the specific ion activity; the other half-battery is the reference battery, often called the reference electrode, which is generally interlinked with the measurement solution, and connected to the measuring instrument.
   
 
Description
Model No.: PH8012
Measuring range: 0-14pH
Temperature range:0-85ºC
Compressive strength:0.6MPa
Slope: ≥96%
Material: PPS/PC
Zero point potential: E0=7PH±0.3
Internal impedance: MΩ(25ºC) ≤250 MΩ
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.

               
Features of PH Electrode:
1.It adopts the world-class solid dielectric and a large area of PCE liquid for junction,difficult to block and easy maintenance
2.Long-distance reference diffusion channel greatly extends the service life of
electrodes in the harsh environment
3. A new design of glass bulb increases the bulb area, prevent bubble formation
interference within the buffer, makes the measurement more reliable.
4.It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is no need of the jacket, thus saving the installation cost.
5.The electrode adopts the high-quality low-noise cable, which makes the signal output length less than 20 meters free of interference.
6.There is no need for additional dielectric and there is a little amount of maintenance.
7.High measurement accuracy, fast echoing and good repeatability.
8.Reference electrode with silver ions Ag/AgCL
9.Proper operation shall make service life longer.
10.It can be installed in the reaction tank or pipe laterally or vertically.
11.The electrode can be replaced by a similar electrode made by any other country.