Products

Mcrt Micro Carbon Residue Tester Which Is Equivalent to The Conradson Carbon Residue Test

China Mcrt Micro Carbon Residue Tester Which Is Equivalent to The Conradson Carbon Residue Test, Find details about China Micro Carbon Residue Tester, Micro Carbon Residue from Mcrt Micro Carbon Residue Tester Which Is Equivalent to The Conradson Carbon Residue Test

Model NO.
GD-17144
Power Source
AC220V
Carbon Residue
ASTM D4530 Micro Carbon Residue Tester
Micro Carbon Residue
Automated Micro Carbon Residue Tester
ASTM D4530
Micro Method Micro Carbon Residue Test (Mcrt)
Measurement Range
0.10% (M/M)~30.0%(M/M)
Temperature of Coke Chamber
500c
Temperature Control Accuracy
+/-2c
Heating Power
1500W
Dimension
520mm*360mm*525mm
Trademark
GOLD
Transport Package
Wooden Case or Venner Case
Specification
refer to ASTM D4530
Origin
Chongqing of China
HS Code
9031809090
Model NO.
GD-17144
Power Source
AC220V
Carbon Residue
ASTM D4530 Micro Carbon Residue Tester
Micro Carbon Residue
Automated Micro Carbon Residue Tester
ASTM D4530
Micro Method Micro Carbon Residue Test (Mcrt)
Measurement Range
0.10% (M/M)~30.0%(M/M)
Temperature of Coke Chamber
500c
Temperature Control Accuracy
+/-2c
Heating Power
1500W
Dimension
520mm*360mm*525mm
Trademark
GOLD
Transport Package
Wooden Case or Venner Case
Specification
refer to ASTM D4530
Origin
Chongqing of China
HS Code
9031809090
GD-17144 MCRT Micro Carbon Residue Tester Which is equivalent to the Conradson Carbon Residue Test



Introduction:

The MCRT Micro Carbon Residue Tester is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products. It determines the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.


Features:
 
1. The MCRT Micro Carbon Residue Tester adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature heating furnace. The design is simple and reasonable.
2.  The Micro Conradson Carbon Residue Tester adopts single chip machine system. The instrument controls the whole procedures automatically according to program preset.
3. The screen adopts all English interface. Operator can do determination by prompts on the screen even no need to read the operation manual. Easy to operate.
4. The Micro Carbon Residue Tester controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the flow rate. The heating rate is accurate and temperature control is stable.
5. It collects test data and calculates results automatically. It can print and save the data according to customer's requirements.
6. The measurement range of this instrument is 0.10% (m/m)~30.0%(m/m).The test result is equivalent to Conradson method if the carbon residue is higher than 0.10%(m/m).
7. The carbon residue apparatus can also be used to determine the petroleum products composed of distillate oils which carbon residue is lower than 0.10%(m/m). But the specimen shall be sampling to 10%(V/V)distillation residue according to GB/T6536(ASTM D86) firstly.
8. It equips a electric balance to achieve the automation of sample weighing and data input.
9. The Key Features of this instrument are: It can detect the micro residual carbon; It can realize the automation of sample weighing data input; The testing process is fully automated.


Parameters:
 
1Power supplyAC(220±10%)V, 50Hz
2Maximum power consumption1600W
3Temperature of coke chamber500ºC
4Temperature control accuracy±2ºC
5Heating power1500W
6Ambient temperature5ºC~35ºC
7Relative humidity≤85%
8Dimension520mm×360mm×525mm



ASTM D4530 MICRO CARBON RESIDUE TESTER:

Mcrt Micro Carbon Residue Tester Which Is Equivalent to The Conradson Carbon Residue Test



 

You Might Also Like