Multi Spot Welding Machine for Stirrups ( DN -5*25-5)

China Multi Spot Welding Machine for Stirrups (DN-5*25-5), Find details about China Multi Spot Welding for Stirrups, Metal Stirrup Spot Welding from Multi Spot Welding Machine for Stirrups (DN-5*25-5)

Model NO.
DN-5*25-5
Model NO.
DN-5*25-5
This machine, All of head to weld at the same time, efficiency is higher than single head, and welding point is consistant, more beautiful.

Features:
- This machine is multi head type structure, can weld multi-spot for one time.
- Control system: Microcomputer control, can store 15 sets welding schedule which can be adjust
Independently, very easy to achieve one or more electrode welding parameters independently
Adjusted so as to achieve welding requirements for different sizes, different shapes products.
- Users can set by himself action sequence, number and welding schedule of cylinder, to achieve
The welding requirements on different products.
- Machine body of thick steel sheet, not easy to deformation, good rigidity.
- Microcomputer control, accuracy and steady
- Water cooling transformer: Use silicon sheets of 15000 gauss permeability to pile up. There is cooling water in inside, using full copper alloy core not aluminum, reducing impedance, improving the utilization of power, 20% duty cycle to ensure the requirement of long time welding, big output power. The useful lifetime is longer, noise is smaller, structure is more compact and reasonable.
- Fast solenoid valve, making welding speed faster, thereby the productivity is higher, therefore decreasing cost.
- Cylinder adopt high accurate, anti-friction hard material, which is duralumin, without rust, lower friction, lower noise and loading is faster, thereby reducing the weld spatter.
- Our machining equipment is more advance, fine workmanship, so welding machine's precision is higher.
- Lower loose weld rate, less welding dregs.
- It is easy to operate machine. Performance of machine is more steady, can be used 24 hours, lifetime 15 years.
- Electrode: With CuCrZr materials, very anti-friction. By means of water cooling, longer service life.
- Compressed air system: Equipment is installed air processor which is used for clean the compressed air, and with muffler to reduce the noise. Also it is with compressed air tank to stabilize the air pressure.
- Cooling water system: There are transformers cooling, up electrode cooling, lower electrode cooling and other copper block cooling. It come true the water distribution by flowmeter. Each flowmeter can be adjusted individually to make machine working normal, without damages

Multi Spot Welding Machine for Stirrups (DN-5*25-5)
Multi Spot Welding Machine for Stirrups (DN-5*25-5)