Salt Mist Spray Test Chamber for Metal Test

China Salt Mist Spray Test Chamber for Metal Test, Find details about China Salt Spray Test Chamber, Salt Spray Chambers from Salt Mist Spray Test Chamber for Metal Test

Model NO.
HD-E808-90
Spray Quantity
1.0~2.0 Ml / 80cm2 / Hr
Brine Temperature
35°c±1°c
Trademark
Haida
Specification
HD-E808
Origin
China
Model NO.
HD-E808-90
Spray Quantity
1.0~2.0 Ml / 80cm2 / Hr
Brine Temperature
35°c±1°c
Trademark
Haida
Specification
HD-E808
Origin
China
             Salt Mist Spray Test Chamber For Metal Test

Product Description
Salt Spray Test Chamber adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

Standard
CNS: 3627, 3385, 4159, 7669, 8886;
JIS: D0201, H8502, H8610, K5400, Z2371;
ISO: 3768, 3769, 3770;
ASTM: 8117, B268


Standard Parameters
ModelHD-E808-90
Internal Size (L×W×H) 900x600x500mm
External Size (L×W×H)1410x880x1280mm
Equipment MaterialBoth inside & outside shell adopt P.V.C rigid plastic board
Temperature RangeRoom temperature ~ 55ºC
Temperature Fluctuations≤±0.5ºC
Temperature Uniformity≤±2ºC
Temperature Precision±1ºC
Spraying methodContinuous and Periodic spray type
Test Chamber TemperatureSalt Spray Method (NSS ACSS)35±1ºC
Corrosion-resistant Testing Method (CASS) 50±1ºC
Saturated air Barrel TemperatureSalt Spray Method (NSS ACSS)47±1ºC
Corrosion-resistant Testing Method (CASS) 63±1ºC
Brine Temperature35ºC±1ºC
Spray Quantity1.0~2.0 ml / 80cm2 / hr
PH valueSalt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume270L
Brine Tank Capacity25L
Multiple Safety Protection DevicesCurrent discharge protection, over pressure protection, over temperature protection, over load fuse protection
AccessoriesTesting Salt/ Measuring tank/Nozzle Equipment x 1 set
Air source1HP Air pump (provided by buyer)

Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.


Salt Mist Spray Test Chamber for Metal Test

Salt Mist Spray Test Chamber for Metal Test

The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.


Salt Mist Spray Test Chamber for Metal Test


After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
 Salt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal TestSalt Mist Spray Test Chamber for Metal Test
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.