Products

Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing

China Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing, Find details about China 300mA Cable Fault Pinpointing Testing Equipment, Audio Magnetic Cable Fault Locator from Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing

Model NO.
PCLD-902P
Accuracy of Pin-Pointing
0.1m
Power Consumption
300mA ,Works More Than 9 Hours
Charger
Input AC220±10, 50Hz; Output 8.4V, DC 1A
Charge Time
More Than 4 Hours
Display
320*240 LCD
Volume
270*150*210mm
Weight
1.5kgs
Trademark
Grewin
Transport Package
Export Standard Carton or Customize Strong Pallet
Specification
PCLD-902P Digital Power Cable Fault Pin-pointer
Origin
China
HS Code
9030899090
Model NO.
PCLD-902P
Accuracy of Pin-Pointing
0.1m
Power Consumption
300mA ,Works More Than 9 Hours
Charger
Input AC220±10, 50Hz; Output 8.4V, DC 1A
Charge Time
More Than 4 Hours
Display
320*240 LCD
Volume
270*150*210mm
Weight
1.5kgs
Trademark
Grewin
Transport Package
Export Standard Carton or Customize Strong Pallet
Specification
PCLD-902P Digital Power Cable Fault Pin-pointer
Origin
China
HS Code
9030899090
Introduction
The PCLD-902P Digital Power Cable Fault Pin-pointer is an easy operation device used to pinpoint the fault point.It's matched with high voltage signal generator.

Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing



                      Fig.1  PCLD-902P


Design Features
  1. Audio magnetic synchronous method,high anti-interference capability
  2. Audio and magnetic signal waveform display.Signal and noise is easy to distinguish
  3. Cursor measurement of audio magnetic delay,accurately distance locating
  4. Route tracing while pinpointing according the initial polarity of magnetic waveform
  5. Build-in High capacity lithium-ion battery and quick charger
  6. High performance antinoise earphone
  7. Power supply management:power off automatically in 15 min. without action; Power off also when low battery voltage.
  8. Big LCD screen,user-friendly
  9. Solid housing case and easy to carry
Tech. Specifications

 
Audio magnetic synchronous pin-pointing:
Audio signal transmission band Mid-frequence 400Hz ,bandwidth 200Hz.
Gain of signal channel  80dB
Accuracy of pin-pointing 0.1m
Power supply:
Battery built-in Li-ion battery pack, nominal voltage 7.4V,Capacity 3000mAH
Power consumption 300mA ,works more than 9 hours
Charger Input AC220±10, 50Hz; output 8.4V, DC 1A
Charge time More than 4 hours
Other
Display 320*240 LCD
Volume 270*150*210mm
Weight 1.5kgs
Work condition -10ºC-40ºC
Humidity5-90%RH
Elevation:<4500m

Physical Characteristics
PCLD-902P Digital Power Cable Fault Pin-pointer
Standard configuration:
Main unit
One sensors
High performance antinoise earphone
Charger
  1. Main unit panel
Details as Fig.2
Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing

                      Fig.2 Main unit front panel
Details:
  1. LCD screen:Display device and testing informations.
  2.      Press 2 sec. to turn on/off the device
  3.      Press to turn on/off the backlight
  4. Pause:Press to pause the magnetic synchronous trigger for waveform checking.Press again to recover.
  5.        Move the cursor
  6. Mag.gain+/-: change the gain of synchronous magnetic signal
  7. Audio gain+/-:Adjust the audio signal gain when distance locating and pinpointing
  8. Sync.:flash one time when magnetic trigger
  9. Charge port:charge for the build-in battery
   Earphone port:Voice monitor when pinpointing
   Sensor:Connect with audio magnetic synchronous pinpointing sensor

Company introduction
Audio Magnetic Digital Cable Fault Testing Equipment Locator for Pinpointing

Certificate:

Low Loss Electrical Power Voltage Transformer with ISO9001: 2015

Contact:
Grewin.Beyond
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com



 

You Might Also Like