Products

24V 2-Wire Asenware En54 Smoke Detector Manufacturer

China 24V 2-Wire Asenware En54 Smoke Detector Manufacturer, Find details about China Smoke Detector, Smoke Alarm Detector from 24V 2-Wire Asenware En54 Smoke Detector Manufacturer

Model NO.
AW-CSD311
Infrared Sensor Probe Type
Inclination Sensor
Infrared Sensor Installation
Ceiling
Combustible Gas Detector Model
CSD311
Height
2.2" (55 Mm) Installed in Base
Diameter
4.0"(103 Mm)
Weight
5.5 Oz. (155 G)
Standby Current
D100ua 24 VDC
Maximum Alarm Current (LED on: )
D55mA 24 VDC
Operating Voltage Range
9 to 32 VDC Volts Non-Polarized
Operating Humidity Range
10% to 93% Relative Humidity, Non-Condensing
Operating Temperature Range
14°f to 120°f (-10°c to 49°c)
Trademark
Asenware
Transport Package
Gift Box + Standard Export Carton
Specification
CE
Origin
Guangdong, China
HS Code
853111000
Model NO.
AW-CSD311
Infrared Sensor Probe Type
Inclination Sensor
Infrared Sensor Installation
Ceiling
Combustible Gas Detector Model
CSD311
Height
2.2" (55 Mm) Installed in Base
Diameter
4.0"(103 Mm)
Weight
5.5 Oz. (155 G)
Standby Current
D100ua 24 VDC
Maximum Alarm Current (LED on: )
D55mA 24 VDC
Operating Voltage Range
9 to 32 VDC Volts Non-Polarized
Operating Humidity Range
10% to 93% Relative Humidity, Non-Condensing
Operating Temperature Range
14°f to 120°f (-10°c to 49°c)
Trademark
Asenware
Transport Package
Gift Box + Standard Export Carton
Specification
CE
Origin
Guangdong, China
HS Code
853111000
24V 2-Wire Asenware En54 Smoke Detector Manufacturer
24V 2-Wire Asenware En54 Smoke Detector Manufacturer

Two type asenware smoke detector series


 

Introduction:

The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.

Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.

The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.

 

Operating Voltage Range9 to 28 VDC Volts Non-polarized
Standby Current≤120μA@24VDC
Maximum Alarm Current (LED on)

≤15mA@24VDC

(1K Ohm current-limiting resistance)

Operating Humidity Range≤95%RH(40°C±2°C) Relative Humidity, Non-condensing
Operating Temperature Range-10°C to 50°C (14°F to 122°F)
Smoke Alarm Sensitivity1.06±.26%FT
Height48.2 mm installed in Base


 

Our company

Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

24V 2-Wire Asenware En54 Smoke Detector Manufacturer

Product range:
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

Welcome contact

 
mobile:0086-136-3251-2808
 

You Might Also Like