Light steel broiler poultry farm and broiler poultry equipment
I.General Description for chicken house design
1) Generally the height of poultry houses is between 2.5m-3.5m (at eaves). The width of the poultry houses is decided according to then layout of equipment inside and cannot be too large considering ventilation. Steel structure poultry houses are usually designed with the width of 8-15m. Length is better no larger than 150m.
2) In modern chicken farms, chicken feeding is operated in large scale in an automatic way. A complete set of equipment in a poultry house consists of the following items: automatic feeding system, automatic nipple drinking system, exhaust fan, evaporative cooling pad, floor for dung leakage, etc..
II.Main components of steel structure chicken hosue
| 1. Base: | Concrete and steel foundation bolts |
| 2. Column and beam: | material Q345(S355JR)or Q235(S235JR) steel, all bolts connection ,straight cross-section or Variable cross-section |
| 3. Bracing: | X or V or other type bracing made from angle , round pipe etc. |
| 4. Galvanized C or Z purlin: | size from C100~C320,Z160~Z300 |
| 5. Roof and Wall Panel: | 1.Single colorful corrugated steel sheet --Thickness:0.12-1.2mm; Width: 310-1150mm, etc.
2.Sandwich panel with EPS, rock wool, glass wool , PU etc.
insulation -- Thickness around 50mm~150mm; Width : 970mm or 950mm |
| 6. Vertical and transversal support: | Q235 angle steel, round bar or steel pipe. |
| 7. wall | Wire meshes with curtain system or sandwich panel |
| 8. equipment | 1.Main feed line system
2.Pan feeding system
3.Nipple drinking system
4.Ventilation system
5.Cooling pad system
6.Spraying system
7.Heating system
8.Environment control system |
| 9. life span | 50 years |
| 10 packing | Standard container package 40 GP or 40 HQ container |
| 11. size | Customized |
| 13. Installation on site | Available |
III.Environment control of poultry house
1. Cooling pad system
Evaporative cooling pad system works in the condition of negative pressure, the cooling pad is installed on one side of the wall, fan installed other side. When air flow through cooling pads, the water evaporation absorbs a lot amount of heat.
The height of cooling pad is 1.5-2.2m, the area of cooling pad in chicken house is about 6-8 times than the fans.
2. ventilating system
The main parts of ventilation system is the big fan and small fan. They are controlled by the control system. The NO. of the fans to run was decided by the temperature of the poultry house.
About 200m2 need 1 big fan and 15-20m need a small fan, this is the standard to design the quantity of fans in chicken house.
3.Automatic pan feeding line system
| V-shape bin (with hopper) | Bin volume: 100L
Material: hot-dip galvanized sheet |
| Motor | Taiwan brand
Power: 0.75Kw/1.1Kw/1.5Kw
Voltage: 380V, three-phase/220V, single-phase/others |
| Delivery pipe | Diameter of pipe: 45mm
Material: hot-dip galvanized steel |
| Auger | Origin: South Africa
Feeding ability: 450Kg/h (maximum) |
| Feed pan | Pan distance: 4 pans/3m, 3 pans/3m
Raising ability: 45-55 birds/pc
Material: pure engineering plastic |
| Sensor | Origin: Germany |
| Suspension &lifting device | We can adjust the feeding line by winch. |
| Anti-perching device | It prevents birds staying on the feeding line for too long. |
*There is a sensor at each feeding line which controls motor on and off to achieve automatically feed delivery.
The motor will start working and deliver feed when the feed pan (with sensor)
lacks feed and will stop working when the feed pan (with sensor) is full of feed.
4. Automatic nipple drinking line system
This system can provide fresh and clean water for poultry which is crucial for the growth of Poultry.
The drinkers can be triggered from 360 degree which helps young birds start well and makes drinking easier.
| Waterline front system | filter
pressure regulating valve
water meter
medicator(doser) |
| Water pipe with nipple drinker and drip cup | Nipple distance: 16 nipples/4m, 12 nipples/3m
Raising ability: 8-12 birds/pc
Nipple material: inside valve is made of stainless
steel, shell is made of plastic
Drip cup material: pure engineering plastic |
| Suspension lifting device | We can adjust the drinking line by winch. |
| Waterline end module | water display tube, etc |
5. Auto chicken cage equipment
Feeding system- Diameter of tube is 45 mm ,feed conveying capacity is 450kg/hour . There are 2 feed pans in one unit .
- Diameter of feed pan is polypropylene diameter of pan is 330mm , with 14 seperations . Each pan can be used for 45~55 birds .
Manure Cleaning system and birds conveying systemAutomatic birds conveying system can save labor cost and increase working efficiency . it can also reduce the damage to the birds and improve economic benefits .Belt manure removal system makes manure drier and easier to to remove and recycle,and heighten the efficiency of reusing manure Poultry slat :Slat size : length 900mm , width 700mm, thickness 45mm .hole size :14*11mm Material: polypropylene . High tensile strength and anti corrosion . Lighting system Voltage of Led lighting system 24v ,IP 65 .Strength of illumination 10-35lux . blue or green light can used which are most favorable to broilers .strength of illumination can be adjusted . IV .Advantages for steel structure house
1) Easy to assemble and disassemble with simple and common tools.
2) Heat and sound insulation, water and fire proofing.
3) Attractive appearance
4) Environmentally friendly and economical . Reasonable design makes it reusable. The reusable character makes it environmentally friendly and economical.
5) Cost efficient -- A grade materials, reasonable price, all investment low requirements for base and short completion time make it cost efficient.
6) Light weight, convenient for shipment and transportation of the steel structure warehouse construction.
7) the components of the house can be used repeatedly
V.Certification :
1. Iso 9001 quality control system .
2. Steel Structure Construction Qualification Certificate Grade II.
VI. About us
1. Professional steel structure manufacturer since 2003.
2. Professional poultry equipment manufacturer since 2009
3. 2, 0000 sqare meters workshop for steel structure
Qingdao Hapy Poultry & Livestock Farm Construction Co., Ltd. , is the professional poultry farm equipment manufacturer with more than 10 years experience in poultry&livestock product development, project designing, installation, the poultry equipment have been sold under the brand "superherdsman" in more than 30 countries .VII.Excellent service we can offer :
1. Poultry house site selection;
2. Poultry house design and construction;
3. Poultry equipment installation and test ;
4. breeding trainning for operation workers
VIII. FAQ question
If clients don't have drawing , we can make a good steel construction plan drawing and quotation as per the following information:
1. Length, Width, Height
2. Local Wind speed, Rain load, Earthquake grade
3. Roof/Wall cladding materials--one layer colored steel sheet or sandwich panel ? We can product EPS, Rock Wool, Fiber glass sandwich panel, Please note us which one you like and the material thickness you need.
4. Door/Window--Size and Position.
5. Do you use crane in it ? If yes, please send the related parameter.
6. Do you need skylights on roof for good bright?
LOOKING FOR AGENTS IN ALL CONTRIES OF THE WORLD . WELCOME TO VISIT OUR FACTORY .!!!