2phase Stepper Motor Driver Cw250 for NEMA23 Stepper Motor
China 2phase Stepper Motor Driver Cw250 for NEMA23 Stepper Motor, Find details about China Stepper Motor Driver, Stepper Controller from 2phase Stepper Motor Driver Cw250 for NEMA23 Stepper Motor
Basic Info.
Model NO.
CW250
Condition
New
Customized
Customized or Non-Coustomized
Material
Aluminum Alloy
DC Power Input Type
20V~60V
Trademark
JK
Transport Package
Export Carton
Specification
CE/ROHS/ISO9001
Origin
China
HS Code
8501109990
Model NO.
CW250
Condition
New
Customized
Customized or Non-Coustomized
Material
Aluminum Alloy
DC Power Input Type
20V~60V
Trademark
JK
Transport Package
Export Carton
Specification
CE/ROHS/ISO9001
Origin
China
HS Code
8501109990
Product Desciption
2phase stepper motor driver CW250 for NEMA23 stepper motor/ 57mm stepper motor driver,CW250 for engraving machine,CW5045 stepper motor driver, CW230 stepper driver,CW8060 stepper driver
Characteristics:
1.DC power input type20V~60V
2.Output current:0~5A
3.Mircostepping:1(1.8º),1/8,
4.Protect form : Overheated protect, lock automatic half current ,error connect protect
5.Dimensions:140mm×94mm×45mm
6.Weight:<500g.
7.Working environment:Temperature-15~40ºC Humidity<90%.
1,VCC+:DC power positive pole
Note:
Must guard against exceeding 40V,
so as not to damage the module
2,GND:DC power cathode
3,A+,A-:Stepping motor one winding
4,B+,B-:Stepping motor other winding
5,CP +,CP -:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6,CW +,CW-:Stepping motor direction input, voltage level touched off,high towards, low reverse
7,NC:vacant
8,GND:The same to "2" The interface see
the right picture
.NOTE:
1, When ambient temperature is high or working current over 3A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2, Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
3, The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake
Switch Choice: ("ON=0,OFF=1")
2,Current choice:
Mainly for 57mm 2phase or 4 phase stepper motor
About our manufacturer:
We are a professional manufacturer for Stepper motor, Stepper driver, BLDC motor and DC motor. we can supply OEM service.
Our products all with CE and ROHS.
Welcome you visit our company Changzhou Jingkong Motor&Electric Appliance Co., Ltd
Characteristics:
1.DC power input type20V~60V
2.Output current:0~5A
3.Mircostepping:1(1.8º),1/8,
4.Protect form : Overheated protect, lock automatic half current ,error connect protect
5.Dimensions:140mm×94mm×45mm
6.Weight:<500g.
7.Working environment:Temperature-15~40ºC Humidity<90%.
I/O Ports:
1,VCC+:DC power positive pole
Note:
Must guard against exceeding 40V,
so as not to damage the module
2,GND:DC power cathode
3,A+,A-:Stepping motor one winding
4,B+,B-:Stepping motor other winding
5,CP +,CP -:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6,CW +,CW-:Stepping motor direction input, voltage level touched off,high towards, low reverse
7,NC:vacant
8,GND:The same to "2" The interface see
the right picture
.NOTE:
1, When ambient temperature is high or working current over 3A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2, Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
3, The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake
Switch Choice: ("ON=0,OFF=1")
2,Current choice:
M100001111
M200110011
M301010101
Current(A)1.522.533.544.55
Mainly for 57mm 2phase or 4 phase stepper motor
About our manufacturer:
We are a professional manufacturer for Stepper motor, Stepper driver, BLDC motor and DC motor. we can supply OEM service.
Our products all with CE and ROHS.
Welcome you visit our company Changzhou Jingkong Motor&Electric Appliance Co., Ltd
if you need more information. please contact with us, our contact information:
Changzhou Jingkong Motor&Electric Appliance Co., Ltd
Contact Person: Ms Jane
Tel: 0086 18206120991
More Quantity. more discount! ! !
| Current choice | ||||||||
| M1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
| M2 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 |
| M3 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| Current(A) | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......