Products

PU Foam Raw Material for Imitation Wood From China

PU Foam Raw Material for Imitation Wood From China, Find details about China Polyol, Blend Polyol from PU Foam Raw Material for Imitation Wood From China

Model NO.
sd2702
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Model NO.
sd2702
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
BLEND POLYOL SD2702
RIGID PU FOAM FOR IMITATION WOOD
PRODUCT INTRODUCTION
SD2702 is suitable for the usage of high density rigid PU foam, which can be used for the field of imitation wood, blocks and so on. When it combined with isocyanate(PM-200) leads to the formation of rigid polyurethane foam by using PU injection machine or handwork. The foam formed has the characteristics as following:
 
  1. Low quantity, high strength of the products
  2. It is suitable for the complex mold.

TYPICAL PHYSICAL PROPERTIES
PerformanceTest StandardUnitIndex
Core DensityGb/T 6343-2009Kg/M370-600
COMPONENT PRODUCT SPECIFICATIONS
PropertyBlend PolyolPolymeric MDI
Product NameSD2702PM200
AppearancePale yellow liquid.Brown liquid
Density at 25°C1.10±0.10 g/cm31.22-1.25 g/cm3
Viscosity at 25°C500-1000 cps200±50 cps
Shelf Life12 months12 months
REACTIVITY PROFILE
Cream TimeGel TimeTack Free TimeFree Rise Density
30-60 s160-200s300-500 s40-500kg/m3
PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)

STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.

SAFETY PRECAUTIONS:
Direct contact with SD2702 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                      
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.

 

You Might Also Like