Products

Automatic Chipboard/Particle Board/Particle Board Machinery Production Line

China Automatic Chipboard/Particle Board/Particle Board Machinery Production Line, Find details about China Partical Board Line, Wood Making Machine from Automatic Chipboard/Particle Board/Particle Board Machinery Production Line

Model NO.
MTJ-1108
HS Code
847930000
Model NO.
MTJ-1108
HS Code
847930000
Automatic Chipboard/Particle Board/Particle Board Machinery Production Line
         

Automatic chipboard/partical board/particle board machinery production line

 1) Chip preparation section
 Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring  flaker by which the chips are turned to flakes,then the flake stored in wet flake bin


2) Drying and sifting section
The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

3) Forming and hot-pressing section
The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw, accelerate conveyor,scaling conveyor , storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.

4) Cooling and sizing section
The rough board is conveyed to star-cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

5) Sanding section
The board are sanded,checked and stored.
PLC control is used in mat-forming section.
 

Automatic Chipboard/Particle Board/Particle Board Machinery Production Line

Automatic Chipboard/Particle Board/Particle Board Machinery Production Line
 

Additional Equipment

NO.

EQUIPMENT

SPECIFICATION

1

heat-conducting oil boiler

Heat supply capacity: 1,200,000 kcal/h,

weldless pipe: 20000mm,

spare parts

2

3-head sander

Pipe: 20000mm

elbows: 40#, 4 pcs

3

air blower

electric motor: 15kw

4

air compressor

0.6 m3

5

dust silo

10 m3,

supplied by buyers

6

stop block

8mm, 13mm, 16mm, 20mm

7

cold steel

Thickness:2.5mm

8

lift

electric motor: 3kw

9

reaction kettle

Capacity: 3T



Pre-sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the video  with Install and debug the equipment
3) Provide technical exchanging




 

You Might Also Like