Oral surgical operation Lamp LED Reflective Dental Lamp

Layout and Configuration:

Working Environment:
 

Technical Parameters:

Installation method:

1. Plug and connect the terminal connectors as shown in Figure 1, to ensure reliable connection of the connector;
2. As shown in Figure 2, insert the shaft of the lamp arm and the base of the lamp into the inner hole of the
lamp arm and align it with the screw hole. Tighten the hexagon socket screw with a tool.
3. Insert the trim cover into the lamp arm as shown in Figure 3.


Instructions:

1. Opening and closing operation: After power-on, push the "toggle switch" to turn on the light or slide the
sensing area with your palm to turn on the light.

2. Turn on/off the anti-cure mode: Slide the toggle switch left to turn on the anti-cure lighting mode. In this case,
the blue component of the light is filtered out and the composite material can be used for a long time. Slide right
to normal operation mode.

3. Both sides of the outer handle, press the top of the Bowen button to pull out, the handle can be removed,
easy to clean and disinfect.