Product Introduction

Many of us associate a happy home with a house surrounded by the quintessential white picket fence. Although life doesn't usually work out so neat and tidy, your picket fence can when you select our closed picket fence solution.

The development of vinyl fences have made great strides in recent years, and the highest quality fences are strong, durable and simple to maintain. Gone are the days of spending several days installing a fence and then planning time to refinish, paint or repair it each summer. Our closed picket fence will stay new looking with virtually no maintenance.

We warranty both our fencing products and our workmanship because we are certain that you will be pleased with the appearance and functionality of our vinyl fences.

ST201-Vinyl Closed Picket Fence(4'Hx8'W)

Can a vinyl fence break?

Any fence will break when enough force is applied. However, Showtech Vinyl profiles are formulated using only the highest quality impact modifiers in precisely engineered amounts to ensure the greatest impact resistance available. Showtech Vinyl profiles are engineered to withstand higher impacts than the minimum required by ASTM.

How is vinyl fence put together?

Most assembly of vinyl fencing is done by snapping the rails into the post using rails that are tabbed with a special tabbing, or notching tool. Depending on the styles of fence, different fasteners can be used. Vinyl channels, which are often used in the fabrication of Privacy and Semi-Privacy styles, are attached using rivits or screws.

How is vinyl fence made? Profiles & Fabrication.

Profiles: Vinyl fence starts out as a PVC powder (Resin) that, when blended with all the required ingredients of our formulation is called compound. This compound then is fed into an extruder. With the proper amount of heat, pressure and mixing via screws in the extruder, the compound becomes malleable vinyl. This vinyl is then fed through a die in the shape of the finished profile. Using vacuum technology to keep the soft pliable vinyl in the proper shape, water is used to cool the vinyl into it's final rigid state.

Fabrication: A Showtech Vinyl fabricatior cuts the wide variety of profiles to the proper lenth for the design of the fence required. The fabricator then routes holes into the rails, so that the pickets can be inserted into them, then holes are routed into the posts so that the rails can be inserted into them. They then may assemble the completed fence sections or leave knocked down for distribution.

Will you attend in the fence exhibitions?

Yes,we will not miss every exhibitions for 15years.

Design Build in Melbourne,Austalia

Fencetech Show in U.S

Internation Hardware show in U.S.

Perimeter Protection in Nurberg,Germany

CONGRESS AND FENCECRAFT in Tornoto,Canada

International Builder's Show(IBS) in U.S

We will post news on the official website about the travel to exhibitions,and if you are at the area around exhibitions, we will send massages to invite you have a face to face talk with us.