China Veterinary Raw Materials 99% Purity Sarafloxacin Hydrochloride, Find details about China Sarafloxacin, Sarafloxacin Hydrochloride from Veterinary Raw Materials 99% Purity Sarafloxacin Hydrochloride
Productname | Sarafloxacin hydrochloride |
CAS NO. | 91296-87-6 |
Synonym | 3-Quinolinec;SARAFLOXACIN HCL;PICOXYSTROBIN, PESTANAL;arafloxacin hydrochloride;SARAFLOXACIN HYDROCHLORIDE;Sarafloxacin trihydrate hydrochloride;Sarafloxacin hydrochloride hydrate ;6-Fluoro-1-(4-fluorophenyl)-4-oxo-7-piperazin-1-ylquinoline-3-carboxylic acid hydrochloride |
MW | 421.83 |
MF | C20H18ClF2N3O3 |
Category | Pharmaceutical Raw Materials, Fine Chemicals, Bulk drug |
Standard | Medical standard |
Function | broad-spectrum antibacterial |
Appearance | Almostt white to light yellow crystalline powder |
Assay | 99% |
Shelf life | 3 years |
Solubility | DMSO1mg/mL;Water<1mg/mLDMSO 1 mg/mL; Water <1 mg/mL |
Package | 1kg/Aluminum Foil Bag, 25kg/drum or at your demands |
Storage | should be stored in a well-closed container at low temperature, keep away from moisture, heat and light. |
Sarafloxacin hydrochloride is a fluoroquinolone antibiotic registered for use against poultry diseases.Sarafloxacin treatment demonstrated mineralization to 14CO2 amounting to 0.58%, 0.49%, and 0.57% in loam, silt loam, and sandy loam soils, respectively, at the termination of the test. Theinhibitory level of sarafloxacin for the tested bacteria was strain dependent. It appeared that in brothculture Escherichia coli isolates were sensitive to sarafloxacin concentrations 5 fold lower than theconcentrations present in the simulated gut model, suggesting that sarafloxacin may be partially unavailableduetoabsorptiontoorganicmatterinthemodel AdministeringSarafloxacinunavailable due to absorption to organic matter in the model.
(1) Sarafloxacin hydrochloride can be absorbed quickly in the body, and the serum concentration can reach the peak value after 1.5 hours oral
administration.
(2) Sarafloxacin hydrochloride good distribution in all tissues of the body.
(3) because of the rapid absorption of excretion, continuous medication for five days, 6 hours of withdrawal, residues are much lower than the required amount.
(4) Sarafloxacin hydrochloride do not need to consider the stopping time of this product, and do not need to stop before the slaughter.
(5)there is no cross resistance to other , and it is still very sensitive to strains that are resistant to antibiotics, sulfonamides, and furans.
(6) good stability, safe medication, cheap price, low treatment cost and low cost.
Items | Specifications | Results |
Appearance | White ro light yellow crystalline powder | Conforms |
Identification | HPLC: The retention time of major peak of test solution should correspond to that of reference solution. | Conforms |
IR: Sample spectrum corresponds to that of standard spectrum. | Conforms | |
Related Substances | Single impurity: NMT2.0% | 0.8% |
Total impurities: NMT5.0% | 3.9% | |
Residual Solvents | Ethanol:NMT30000ppm | 360ppm |
Acetone: NMT5000ppm | 140ppm | |
BHT | NMT2000ppm | 316ppm |
Sulphated Ash | NMT0.1% | 0.07% |
Heavy Metals | NMT20ppm | <20ppm |
Water | NMT3.0% | 1.8% |
Loss on drying | ≥8.0% |
|
Melting point | ≥300°C |
|
Boling Point | 621.4°C at 760 mmHg | Conforms |
Flash Point | 329.6°C | Conforms |
Vapour Pressure | 2.67E-16mmHg at 25°C | Conforms |
Assay(on anhydrous and solvent free basis) | ≥99.0% | 99.6% |