Products

DC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet Protection

China DC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet Protection, Find details about China Poe Surge Protector, Gigabit Poe Lightning Arrester from DC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet Protection

Model NO.
SNH-RJ45/POE
Shape
Cuboid
Material
ZnO
Certification
ROHS, ISO9001, FCC, National Type Test
Brand
Opplei
Working Voltage Un
48V
Nominal Discharge Current(8/20&Ms)in
5ka
Protection Level (8/20µs)up
100V
Protection Line
1-8
Dimension
28(H)×87(W)×100(L)mm
IP Level
IP20
Working Conditions
Temperature: -40 to 85oc
Standards Compliance
Ce, FC, RoHS, ISO9001
Adapt Transmission Rate
1000Mbps
Insertion Loss
≤0.5dB
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
Model NO.
SNH-RJ45/POE
Shape
Cuboid
Material
ZnO
Certification
ROHS, ISO9001, FCC, National Type Test
Brand
Opplei
Working Voltage Un
48V
Nominal Discharge Current(8/20&Ms)in
5ka
Protection Level (8/20µs)up
100V
Protection Line
1-8
Dimension
28(H)×87(W)×100(L)mm
IP Level
IP20
Working Conditions
Temperature: -40 to 85oc
Standards Compliance
Ce, FC, RoHS, ISO9001
Adapt Transmission Rate
1000Mbps
Insertion Loss
≤0.5dB
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
Indoor RJ45 1000Mbps single channel Gigabit Power over Ethernet Surge protector

Model: SNH-RJ45/POE

 
APPLICATIONS:
Designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage and static discharge.
CAT6, CAT5e and CAT5 compatible
802.3af
10/100/1000 Base-T Gigabit Ethernet protection
LAN, FDDI,CDDI, ATM,WLAN
PDH, SDH, SPDH
Industrial control
 
FEATURES:
Multi. Protection circuits, Gas-Tube + TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
 
TECHNICAL PARAMETER:		 
ModelSNH-RJ45/POE
Electrical Parameter(Network & Power)
Nominal operating voltage Un48V
Max. continuous operating voltage Uc60V
Nominal discharge current(8/20µs)In3kA
Max. discharge current  (8/20µs)Imax5kA
Limiting voltage Up 
Line-line (@6kV, 10/700µs) ≤150V
Line-line (@3kA, 8/20µs) ≤150V
Adapt transmission rate1000Mbps
Insertion loss≤0.5dB
Protection line1-8
Response time 1ns
Load current250mA
ApplicationCat. 6
Mechanical characteristics 
Dimension28(H)×87(W)×100(L)mm
Weight per unit120g
Protection grade IP20
Working conditionsTemperature: -40 to 85ºC, 
Relative humidity: ≤95%
Standards complianceCE, FCC, RoHS, ISO9001
 
 
 
DC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet Protection
DC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet ProtectionDC48V 100m /1000m Poe Surge Protection Devices (SPD) for Ethernet Protection
 

INSTALLATION AND MAINTENANCE
  1. The SPD should be connected in series between the protected device and the signal/power transmission channel.
  2. The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
  3. Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
    No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.


 

You Might Also Like