Grip, Preformed 266.8mcm Patridge

China Grip, Preformed 266.8mcm Patridge, Find details about China Compression Connector, Hotline Clamp from Grip, Preformed 266.8mcm Patridge

Basic Info.

HS Code

73269090

HS Code

73269090

Product Desciption

B37 Connector wedge to pressure 2 AWG with stirrup

	2 AWG pressure wedge connector with stirrup
	ANSI C119-4, ASTM 153
	ISO 9001
	Aluminum alloy, bimetallic
	Aluminum alloy
	Tinned copper
AWG	2
mm²	42.41
AWG	2/0
	little
	White

6	Rules		ANSI C119-4, ASTM 153
7	Quality certificate		ISO 9001
8	DN-DS certificate		Attach acceptance certificate and homologation
9	Raw material of the body		Specify
10	Galvanized		Hot dip
	characteristics
11	Main range	AWG	2/0 -2
12	Connection diameter maximum derivation		1 (13/32)
13	Minimum derivation connection diameter		4 (3/16)
14	DN-DS certificate		Attach acceptance certificate and homologation
15	Identification mark		Each connector must be marked on the body with the manufacturer's symbol, catalog number, application conductor ranges and number of die to be occupied with the hydraulic tool for its installation

Type H aluminum compression connector, 2 - 6
AL 2 - 6 ACSR.

4	Connector name		Type H aluminum compression connector, 2 - 6 AL 2 - 6 ACSR.
5	Raw material		The connectors must be made of alloy pressure-stretched aluminum, with a high degree of hardness Rockwell RH30, or a ductile aluminum high conductivity alloy 1100-0, which is a highly pure aluminum
6	Rules		ANSI C119.4
7	Quality certificate		ISO-9001 or recent
8	Finish		The surface of the connectors should be smooth , free of astilaldura or imperfections
9	Shape		H
10	Main Calibres Range	ACSR	# 2
11	Secondary Calibers Range	ACSR	# 2
12	High	inch(mm)	1.12 (31)
13	Long	inch(mm)	1.5 (29)
14	Width	inch(mm)	0.7 (18)
15	External Comma		The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface
16	Inhibitory compound		Each connector must present in the slot a Composite of the oxide and galvanic corrosion
17	Identification mark		Each connector should be marked with the manufacturer's symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer's brand and name, which must necessarily be indicated on the body of the connector
18	Packaging		Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation.

for cable #2

6	Rules		ANSI C119-4, ASTM 153
7	Quality certificate		ISO 9001
8	DN-DS certificate		Attach acceptance certificate and homologation
9	Raw material of the body		Specify
10	Galvanized		Hot dip
	characteristics
11	Main range	AWG	2/0 -2
12	Connection diameter maximum derivation		1 (13/32)
13	Minimum derivation connection diameter		4 (3/16)
14	DN-DS certificate		Attach acceptance certificate and homologation
15	Identification mark		Each connector must be marked on the body with the manufacturer's symbol, catalog number, application conductor ranges and number of die to be occupied with the hydraulic tool for its installation

Crossover Marks: Indicate starting point for application.
Color Code and Length: Assist in identification of conductor size.
Identification Tape: Shows manufacturer catalog number, nominal sizes.

Item #	Diameter Range (inches)		ACSR	Nominal conductor Sizes			Length (Inches)	Color Code
Item #	Min	Max	ACSR	All- Alum	Alum. Alloy	Comp ACSR	Length (Inches)	Color Code
35	0.654	0.739	336.4, 18/1	336.4, 19W	336.4, 19W	397.5, 18/1	39	Green
37	0.578	0.653	266.8 18/1	266.8, 19W	266.8, 19W	336.4, 18/1	35	Black
60	0.654	0.739	336.4, 18/1	336.4, 19W	336.4, 19W	397.5, 18/1	39	Green
100	0.740	0.837	397.5, 18/1 477, 36/1 477, 18/1	450, 19W 477, 19W 500, 37W	397.5, 19W	477, 18/1 556, 19W	50	Orange

4	Connector name		Aluminum compression connector type H, 1/0 - 3 AL 2 - 6 ACSR.
5	Raw material		The connectors must be made of alloy pressure-cast aluminum, with a high degree of Rockwell RH30 hardness, or a 1100-0 high conductivity aluminum ductile alloy, which is a highly pure aluminum
6	Rules		ANSI C119.4
7	Quality certificate		ISO-9001 or recent
8	Finish		The surface of the connectors should be smooth , free of astilaldura or imperfections
9	Shape		H
10	Main Calibres Range	ACSR	1 / 0-3
11	Secondary Calibers Range	ACSR	2-6
12	High	inch(mm)	1.2 (30)
13	Long	inch(mm)	1.75 (44)
14	Width	inch(mm)	0.70 (18)
15	External Comma		The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface
16	Inhibitory compound		Each connector must present in the slot a Composite of the oxide and galvanic corrosion
17	Identification mark		Each connector should be marked with the manufacturer's symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer's brand and name, which must necessarily be indicated on the body of the connector
18	Packaging		Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation.

4	Material name		Aluminum compression connector Type H, 3/0 AL 3/0 ACSR
5	Raw material		Bimetallic aluminum pressure stretched, with high degree of hardness Rockwell RH30, high conductivity 1100-0
6	Rules		ANSI C119.4, UL486 A
7	Quality certificate		ISO 9001
8	Kind		H
9	Main gauges		3/0 - 4/0 ACSR
10	Caliber derivation		3/0 - 4/0 ACSR
11	Type of conductor to be connected		Aluminum, copper and ACSR
12	Slot with rust inhibitor		Yes
13	Height approx.	inch(mm)	1-1 / 2 (38.10)
	Length approx.	inch(mm)	2- 1/2 (63.5)
14	Width approx.	inch(mm)	6/7 (21.77)
15	External Comma		The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface
16	Inhibitory compound		Each connector must present in the slot a Composite of the oxide and galvanic corrosion
17	Identification mark		Each connector should be marked with the manufacturer's symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer's brand and name, which must necessarily be indicated on the body of the connector
18	Packaging		Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation.

kV to 38 kV grounded systems with 100 or 200 A nominal currents.

4	Connector name		Compression connector grounding pin for cable # 2
5	Raw material		Body: Electrolytic copper manufactured by extrusion, high resistance- With inhibitor
6	Driver to press		Copper
7	Driver to connect on the pike grounding	AWG	2
8	Applied standards		ANSI C 119.4, IEEE837
9	Quality certificate		ANSI C 119.4, IEEE837
10	Main admissible diameter	inch(mm)	5/8 (15.8)
11	Permissible diameter	inch(mm)	0.29 to 0.23 (7.4 to 5.8)
12	DN-DS certificate		Attach acceptance certificate and homologation
13	Identification mark		Each connector should be marked on the body with the manufacturer symbol, catalog number, application driver ranges and die number to occupy with the hydraulic tool for installation
14	Packing		The connectors should be in a package that indicates in its exterior the range of application and prevent external agents from damaging it and causing premature oxidation

Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
Grip, Preformed 266.8mcm Patridge

The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.

Product	D Bracket
Test Items	Test Content	Test Result
Test Items	Test Content	Sample 1	Sample 2	Sample 3	Sample 4	Sample 5	Remarks
Visual Inspection	Crack	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Galvanizing thickness	μm	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion:
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date: 02. March,2011 Approved:

Products

Grip, Preformed 266.8mcm Patridge

You Might Also Like

Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......

EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......

100g high performance desiccant in Tyvek

Truck Spare Parts Weichai Engine Intake Rocker Arm Best

Art Glass Smoking Water Pipe ( AY 020)

Pdadmac 40% Cationic Polymer for Sludge Dewatering

Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......

High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......

Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......

Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......