Products

0.15mm Galvanized Siding Material/Gi Corrugated Sheet

China 0.15mm Galvanized Siding Material/Gi Corrugated Sheet, Find details about China Galvanized Corrugated Iron Sheet, Galvanized Corrugated Sheet from 0.15mm Galvanized Siding Material/Gi Corrugated Sheet

Model NO.
0.15-0.8*60-1250MM
Special Use
Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
Stock
Stock
Place of Origin
Zhengzhou China (Mainland)
Usage
Roof/Wall Cladding/Fencing
Normal Size
600/800/840/900/1050
Material
Galvanized or Galvalume Steel
Length
as Customer′s Requirement
Surface
Oiled, Passivated, Anti Finger
Grade
SGCC, Dx51d+Z
Thickness
0.12mm-1.2mm
Thickness Tolerance
+/-0.02mm
Lifetime
15-20 Years
Trademark
CUS-STEEL
Transport Package
Standard Seaworthy Export Packing or as Required
Specification
SGCC, DX51D, ASTM A653, JIS G3302
Origin
Zhengzhou, China(Mainland)
HS Code
72104100
Model NO.
0.15-0.8*60-1250MM
Special Use
Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
Stock
Stock
Place of Origin
Zhengzhou China (Mainland)
Usage
Roof/Wall Cladding/Fencing
Normal Size
600/800/840/900/1050
Material
Galvanized or Galvalume Steel
Length
as Customer′s Requirement
Surface
Oiled, Passivated, Anti Finger
Grade
SGCC, Dx51d+Z
Thickness
0.12mm-1.2mm
Thickness Tolerance
+/-0.02mm
Lifetime
15-20 Years
Trademark
CUS-STEEL
Transport Package
Standard Seaworthy Export Packing or as Required
Specification
SGCC, DX51D, ASTM A653, JIS G3302
Origin
Zhengzhou, China(Mainland)
HS Code
72104100
1. GI Corrugated Sheet simple introduction
It is one of the most corrosion resistant corrugated materials offered in the architectural roofing and siding panel market. Unlike normal galvanizing, this metal material is an actual combination of aluminum and zinc to provide excellent protection.


2. GI Corrugated Sheet main structure
It is carbon steel sheet coated with aluminum-zinc alloy by a continuous hot-dip process described in Production Methods. The nominal coating composition is 55% aluminum and 45% zinc. A small but important amount of silicon is included in the coating alloy.


3. GI Corrugated Sheet installation tips
1)Prepare the roof surface by removing any old roofing, rotten wood, adding roofing felt to the entire surface.
2)Calculate the number of galvanized corrugated iron sheet needed. Divide the area of your roof by the size of the sheets you will be using.
3)Place your first metal sheet in a corner of the roof, flush against the surface.
4)Nail in the first metal sheet to the wood of the roof.
5)Place the second metal sheet alongside the first with an overlap of 3 to 4 inches (10 cm).
6)Nail the second metal sheet to the roof.


4. Tools you'll need when install GI Corrugated Sheet
1)Roofing Sheets-GI Corrugated 2)Metal ridge caps 3)Roofing felt (if needed) 4)Nails
5)Hex screws 6)Washers 7)Hammer 8)Drill
 
Product nameGI Corrugated Sheet
Standard0.12-1.2*750-1250mm*C
Thickness0.12-1.2mm
Width before corrugated750-1050mm
Width after corrugated665-1100mm
LengthAny length is ok 
Wave depth16(+/-2mm)
Zinc coating40--275g/m2
Colorblue,red,green,yellow,purple,pink and any other colors on the RAL colors
ApplicationCarport, Hotel, House, Kiosk,Booth, Office, Sentry Box,Various roofs and walls referring
to the large size factory buildings, storages,exhibition halls, convention centers etc.
PackingExport standard seaworthy packing





 

You Might Also Like