China Cop 200kw Biogas Generator, Find details about China CHP System, Biogas Generator from Cop 200kw Biogas Generator
Engine Mode | RTA780-G1 | |||||||||
Air ratio | λ | 1.70 | ||||||||
Engine Speed | (RPM) | 1500 | ||||||||
Generator set Frequency | (Hz) | 50 | ||||||||
Volt | (V) | 400 | ||||||||
Engine Continuous Power (COP) | (kW) | 222 | ||||||||
Single Fan Power | (kW) | 8 | ||||||||
Single Fan Consumption | (kW) | 8 | ||||||||
Quantity of Fan | (Sets) | 1 | ||||||||
All Fan Consumption | (kW) | 8 | ||||||||
BMEP for Continuous Output | (bar) | 13.84 | ||||||||
Generation ContinuousOutput | (kVA) | 250 | ||||||||
Generation Continuous Output | (kW) | 200 | ||||||||
Alternator Efficiency | ≥ | 93.50% | ||||||||
AlternatorBrand | MEEC-ALTE | |||||||||
AlternatorModel | ECO38-2LN/4 | |||||||||
Alternator Prime Output | kW | 240 | ||||||||
The Temperature rising's class | F class(105 °C ) | |||||||||
The Quantity of Alternator's Bearing | set | 1 | ||||||||
Power Factor | 0.8 | |||||||||
Speed droop (static) elect. Gov. | 0-5% | |||||||||
Governing standards to ISO 8528 Parts 1 and 5 | G3 | |||||||||
Aspiration Type | Turbocharger, air-water after-cooler | |||||||||
Configuration | Vee | |||||||||
No. of Cylinders | 6 | |||||||||
Displacement | (liters) | 12.8 | ||||||||
Bore | (mm) | 128 | ||||||||
Stroke | (mm) | 166 | ||||||||
Compression Ratio | 11:1 | |||||||||
Piston Speed | (m/s) | 8.30 | ||||||||
Rotation Direction (from flywheel) | Counter Clockwise | |||||||||
Number of Flywheel Teeth | 160 | |||||||||
Flywheel House Size | SAE1-14 | |||||||||
Lube Oil Specification | AFI-CF4 | |||||||||
Oil Capacity | (Liters) | 40 | ||||||||
Max. Permissible Oil Temperature | (°C) | 110 | ||||||||
Low Oil Pressure Warning | (kPa) | 200 | ||||||||
Low Oil Pressure Shutdown | (kPa) | 160 | ||||||||
Oil consumption | g/kWh | ≤0.50 | ||||||||
Coolant Capacity for Engine | (Liters) | 18 | ||||||||
Max. permissible Temperature of Cylinder Inlet | (°C) | 85 | ||||||||
Max. permissible Temperature of Cylinder Outlet | (°C) | 88 | ||||||||
Max. Coolant Warning Temperature | (°C) | 93 | ||||||||
Max. Coolant Shutdown Temperature | (°C) | 97 | ||||||||
Thermostat Open Temperature | (°C) | 71 | ||||||||
Flow of CylinderCoolant | (m³/h) | 19.7 | ||||||||
Max. aftercooler cooling water inlet temperature | (°C) | 45 | ||||||||
Max. aftercooler cooling water outlet temperature | (°C) | 50 | ||||||||
Flow of aftercooler cooling water | (m³/h) | 6 | ||||||||
Radiator Cooling Flow | (m³/s) | 10.1 | ||||||||
Radiator Model | RSCN1000A | |||||||||
Heat dissipation (engine cylinder liner) ± 8 % | (kW) | 88 | ||||||||
Heat dissipation (Exhaust cooled to 120°C) ± 8 % | (kW) | 127 | ||||||||
Gas Consumption + 5 % | (kW) | 523 | ||||||||
Electrical Efficiency | 38.24% | |||||||||
Mechanical Efficiency | 42.43% | |||||||||
Thermal Efficiency | 41.02% | |||||||||
Total Efficiency | 83.45% | |||||||||
Intake and Exhaust system | ||||||||||
Total Air Consumption | (kg/hr) | 3755 | ||||||||
Combustion Air Consumption | (kg/hr) | 751 | ||||||||
Max. Intake Restriction | (mbar) | 5.0 | ||||||||
Gas Inlet Pressure Value | mbar | 20-200 | ||||||||
Gas Inlet Pressure Ratio | ± 10 % | |||||||||
Max. Exhaust Temperature(Before Turbo) | (°C) | 630 | ||||||||
Max. Exhaust Temperature(After Turbo) | (°C) | 480 | ||||||||
Min. Exhaust Back Pressure | mbar | 20.0 | ||||||||
Max. Exhaust Back Pressure | mbar | 40.0 | ||||||||
Exhaust Gas Flow | (kg/hr) | 776 | ||||||||
Exhaust Flange Diameter | (mm) | 1*125 | ||||||||
Emissions NOx | mg/m³ | < 500 | ||||||||
Electrical System | ||||||||||
Charging Alternator Voltage | (V) | 28 | ||||||||
Charging Alternator Capacity | (A) | 35 | ||||||||
Starting Voltage | (V) | 24 | ||||||||
Starting Motor Capacity | (kW) | 1*6.6 | ||||||||
Minimum Battery Capacity | (Ah) | 2*200 | ||||||||
Minimum Temperature for Unaided Cold Start | (°C ) | 10 | ||||||||
Single Controller Panel Model | GPDC250-HGM9510 /400V/400A | |||||||||
Breaker's Brand | DELIXI | |||||||||
Breaker's Model | CDM1-400M/4340P 400A | |||||||||
Breaker's Capacity | (A) | 400 | ||||||||
Generator-set Controller's Brand | GOOGOL-POWER | |||||||||
Single Generator-set Controller's Model | HGM9510 | |||||||||
Gas Control System | ||||||||||
Ignition Controller | Brand | Motortech (Germany) | ||||||||
Detonation Controller | Brand | Motortech (Germany) | ||||||||
Air/Fuel Ratio Mixer | Brand | Motortech (Germany) | ||||||||
Speed Controller | Brand | Motortech (Germany) | ||||||||
Emission Control System | Brand | Motortech(Germany) | ||||||||
Length | (mm) | 1745 | ||||||||
Width | (mm) | 900 | ||||||||
Height | (mm) | 1196 | ||||||||
Engine Dry Weight w/o Cooling System | (kg) | 1025 |