Io Stepper Motor Driver Drive
China Io Stepper Motor Driver Drive, Find details about China Motor Driver, Stepper Driver from Io Stepper Motor Driver Drive
Basic Info.
Model NO.
6008SA
Condition
New
Customized
Customized
Material
Stainless Steel
Name
Io Stepper Motor Driver Drive
Trademark
Novotech
Transport Package
Green Export Package
Specification
CE, ISO9001, RoHS
Origin
China
HS Code
8503009090
Model NO.
6008SA
Condition
New
Customized
Customized
Material
Stainless Steel
Name
Io Stepper Motor Driver Drive
Trademark
Novotech
Transport Package
Green Export Package
Specification
CE, ISO9001, RoHS
Origin
China
HS Code
8503009090
Product Desciption
IO Stepper Motor Driver Drive
Note : All above is normally used, and we can customize according to your request or choose the suitable model for you.
Character
1.Operating voltage: DC24 to75VDC, the max output peak current is7.2A
2.Pulse, direction compatible with enable signal interface level 4.5-28Vdc, no external current limiting resistor
3.The maximum pulse frequency of the control command is 500 kHz(Factory default is 150KHz)
4.Using flux linkage anti-resonance algorithm and electronic damping low-speed anti-vibration algorithm
5.Built-in micro-step subdivision algorithm to achieve low-subdivision control instructions, high-subdivision operation results
6.Automatic identify of motor parameters and automatic adjustment of control parameters when power on
7.Provide 15 positions of conventional micro-step subdivision set
8.Can be derived three IO input control speed function
9.High reliability, the signal interface using optoelectronic isolation
10.With protection of over-voltage, over-current, undervoltage and others
11.Accept differential and single-end pulse / direction instructions
Application
Novotech driver used in marking machine, cutting machine, laser phototypesetting, plotter, transmission power lines, automatic assembly and other equipments. It suitable for a lot of small and medium-sized automation equipments and instruments, has outstanding performance in the equipments that users expect small noise and high-speed.
Current setting
Half And Full Current Set SW4(idle)
If the driver does not receive the pulse command after 200ms, it enters the idle mode, SW4 can set the current.
Subdivision Setting
Packaging and shipping
1.Outer packing: Standard export carton with required shipping marks
2.Inner packing: Waterproof packing with shock absorbing EPE and cardboard surrounded
3.As per the clients requirements
Our service
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warrantity period : 18 months and Life-long maintenance service for the product.
4.We accept products customize.
FAQ
Q1: How to choose the suitable stepper driver?
A1: Please tell us your stepper motor's model, we will choose the suitable one according to motor's model.
Q2: Any other methods to finalize the model?
A2: Sure, you can send us the model you are using, we can help you find the suitable one.
Q3:How to guarantee the Quality of Industrial Parts?
A3: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.
Q4:What's the Advantage of Your Parts for Industry Products?
A4:1.The advantage of our products is the competitive prices, fast delivery and high quality. Our
employees are responsible-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, smooth finish and long service time.
2.Before we send out the goods,we check them more than three times.
Contact
Note : All above is normally used, and we can customize according to your request or choose the suitable model for you.
Character
1.Operating voltage: DC24 to75VDC, the max output peak current is7.2A
2.Pulse, direction compatible with enable signal interface level 4.5-28Vdc, no external current limiting resistor
3.The maximum pulse frequency of the control command is 500 kHz(Factory default is 150KHz)
4.Using flux linkage anti-resonance algorithm and electronic damping low-speed anti-vibration algorithm
5.Built-in micro-step subdivision algorithm to achieve low-subdivision control instructions, high-subdivision operation results
6.Automatic identify of motor parameters and automatic adjustment of control parameters when power on
7.Provide 15 positions of conventional micro-step subdivision set
8.Can be derived three IO input control speed function
9.High reliability, the signal interface using optoelectronic isolation
10.With protection of over-voltage, over-current, undervoltage and others
11.Accept differential and single-end pulse / direction instructions
Application
Novotech driver used in marking machine, cutting machine, laser phototypesetting, plotter, transmission power lines, automatic assembly and other equipments. It suitable for a lot of small and medium-sized automation equipments and instruments, has outstanding performance in the equipments that users expect small noise and high-speed.
Current setting
| Output peak current | Output RMS current | SW1 | SW2 | SW3 |
| Default 1.4A[PK] | ON | ON | ON | |
| 3.08A | 2.57A | OFF | ON | ON |
| 3.77A | 3.14A | ON | OFF | ON |
| 4.45A | 3.71A | OFF | OFF | ON |
| 5.14A | 4.28A | ON | ON | OFF |
| 5.83A | 4.86A | OFF | ON | OFF |
| 6.52A | 5.43A | ON | OFF | OFF |
| 7.20A | 6.00A | OFF | OFF | OFF |
Half And Full Current Set SW4(idle)
If the driver does not receive the pulse command after 200ms, it enters the idle mode, SW4 can set the current.
| Current percentage as idle state | SW4 mode |
| 50% | OFF |
| 100% | ON |
Subdivision Setting
| Step/Rev. | SW5 | SW6 | SW7 | SW8 |
| 400 | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| 1000 | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Packaging and shipping
1.Outer packing: Standard export carton with required shipping marks
2.Inner packing: Waterproof packing with shock absorbing EPE and cardboard surrounded
3.As per the clients requirements
Our service
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warrantity period : 18 months and Life-long maintenance service for the product.
4.We accept products customize.
FAQ
Q1: How to choose the suitable stepper driver?
A1: Please tell us your stepper motor's model, we will choose the suitable one according to motor's model.
Q2: Any other methods to finalize the model?
A2: Sure, you can send us the model you are using, we can help you find the suitable one.
Q3:How to guarantee the Quality of Industrial Parts?
A3: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.
Q4:What's the Advantage of Your Parts for Industry Products?
A4:1.The advantage of our products is the competitive prices, fast delivery and high quality. Our
employees are responsible-oriented, friendly-oriented,and diligent-oriented. Our products are featured by strict tolerance, smooth finish and long service time.
2.Before we send out the goods,we check them more than three times.
Contact
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......