Products

Liquid Condensation Silicone Rubber for Pouring Mold Making

China Liquid Condensation Silicone Rubber for Pouring Mold Making, Find details about China Silicone, Silicone Rubber from Liquid Condensation Silicone Rubber for Pouring Mold Making

Model NO.
HY-630 silicon
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
25kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000
Model NO.
HY-630 silicon
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
25kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000

liquid condensation silicone rubber for pouring mold making   

 

Applications of liquid condensation silicone rubber for pouring molds 

silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc. 

Descriptions of  liquid condensation silicone rubber for mold making : 

 silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

Liquid Condensation Silicone Rubber for Pouring Mold Making

OPERRATING INSTRUCTION  :

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE:

 Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

SPECIFICATIONS

Model

HY630

Color

white

Mixing ratio

100:5

Operating time (mins 25 0C )

40-70

Curing time(hours 25 0C)

4

Hardness (A°) 

30±2

Density ( g/cm 3 )

1.08

Viscosity (Mpas -25 0C)

24000±3000

Tensile-strength(kgf /cm2 )

≥45

Tear-strength (kgf /cm )

≥28

Elongation-break(%)

≥ 500

Retractility(%)

≤0.25

Shelf life (month)

≥12

Package
Liquid Condensation Silicone Rubber for Pouring Mold Making

Liquid Condensation Silicone Rubber for Pouring Mold Making
 

You Might Also Like