China 15V 20A 300W LED Power Supply, Find details about China Switch Power Supply, LED Power Supply from 15V 20A 300W LED Power Supply
Model | S-300-5 | S-300-12 | S-300-15 | S-300-24 | S-350-27 | S-300-48 | |
output | DC voltage | 5V | 12V | 15V | 24V | 27V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Rated current | 50A | 25A | 20A | 12.5A | 11A | 6.5A | |
Current range | 0~50A | 0~25A | 0~20A | 0~12.5A | 0~11A | 0~6.5A | |
Rated power | 250W | 300W | 300W | 300W | 297W | 312W | |
Ripple&noise | 100mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 200mvp-p | |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
input | Voltage range | 90~132VAC/180~264VAC(selected by switch),255~373VDC | |||||
frequency | 47~63HZ | ||||||
AC current | 6.5A/115VAC,4.0A/230VAC | ||||||
efficiency | 78% | 80% | 80% | 82% | 82% | 83% | |
Inrush current | Cold start current25A/115VAC,50A/230VAC | ||||||
Leakage current | < 3.5mA/240VAC | ||||||
protection | overload | Rated output power105%~135% start over load protection | |||||
protection type :rated current limit,auto-recovery after fault condition is removed | |||||||
Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 33.2~35.6V | 54.8~56.6V | |
Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
Over temperature | ≥55ºCfan on,≤50ºCfan off,≥85ºCstart over temperature protection | ||||||
Protection mode:cutoff output,auto-recovery after temperature become normal | |||||||
environment | Working temp,humidity | -10ºC~+60ºC,20%~90%RH | |||||
Storagetemp,humidity | -20ºC~+85ºC,10%~95%RH non-condensing | ||||||
Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||||
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
Fitstandard | Safety standard | Compliance to UL1012 | |||||
EMC standard | Compliance to EN55022,CLASSA | ||||||
others | Dimension | 215*115*50mm(L*W*H) | |||||
Weight/packing | 1.0kg/24pcs/25kg/0.049 m³/1.72CUFT | ||||||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation |