CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment

China CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment, Find details about China Stepper Driver, Motor Driver from CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment

Model NO.
EPDC-10
Certification
CE, RoHS, Reach
Brand
Ever Electronica
Origin
Jiangsu, China
Model NO.
EPDC-10
Certification
CE, RoHS, Reach
Brand
Ever Electronica
Origin
Jiangsu, China
CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment
Product Description
2 phase step motor bipolar chopper drive technical data :
• DC power supply : 24 ÷ 75 Vdc;
• Phase current : up to 10 Apeak
• Chopper frequency: ultrasonic 40KHz;
• Emulated Step angle: Full Step, ½, ¼, 1/8, 1/16, 1/32, 1/64, 1/128, 1/5, 1/10, 1/20, 1/25, 1/30, 1/36, 1/50, 1/100
configurable by means of Dip-Switches and other step angle could be defined by software.
• Protections against : over current, over/under voltage, overheating, short circuit between motor phase-to
phase and phase-to-ground;
• Encoder input (not isolated): 5V Differential (RS422) incremental encoder
• Service SCI interface for programming and real time debugging
• Dimensions : 118 x 75,5 x 25,5 mm (without connectors);
• Protection degree : IP20 ;
• Pollution degree : 2 ;
• Working temperature 5°C ÷ 40°C ; Storage temperature -25°C ÷ 55°C ;
• Humidity : 5% ÷ 85% not condensing;
Product Parameters
Digital output connection
Digital outputs are 5-24Vdc PNP/NPN , IOUTmax=100mA
Fmax = 2 KHz
CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment
CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment
ModelMax CurrentPower SupplyControl ModeInput/OutputMatched Step Motor
EPDO-022.4A15-48VPULSE MODE3 IN/0 OUTNEMA8 TO NEMA17 OPEN LOOP
EPDO-044.5A24-48VPULSE MODE3 IN/1 OUTNEMA23 TO NEMA24 OPEN LOOP
EPDO-087.8A24-75VPULSE MODE3 IN/1 OUTNEMA34 OPEN LOOP
EPAO-044.2A100-240VACPULSE MODE4 IN/1 OUTNEMA34 OPEN LOOP
EPDC-1010A24-75VDCPULSE MODE/programmable3 IN/2 OUTNEMA11 TO NEMA 34 CLOOSE LOOP

Verify the installation
-   Check all connections :  Power supply, Stepper motor and control logics.
-   Make sure that all settings are correct for the application.
-   Make sure that the characteristics of the DC power supply are appropriate for the drive.
-   If possible, remove the load from the rotor of the motor to avoid wrong movements and eventual damages.
-   Enable the current in the motor (without STEP Clock) and, if possible, verify the presence of the Holding Torque.
-   Execute a movement of some steps and verify if the rotation direction is the desired one.
-    Supply power and make sure that the green led is on or blinking. If the led is OFF, shut down immediately and check if
all connections are correct.
 
If the motion direction is not the desired one, it is possible to change it leaving the DIR input unchanged and
reversing the connection of a single phase of the motor to CN2, for example A with A/.
- Disconnect the power supply, fix the motor to the load and check the full functionality.

CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment
CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment
Company Profile

    Taking advantage of the proactive climate of the 70s, in 1977 the engineer Felice Caldi, who had always been a passionate builder and inventor, founded an innovative company, operating internationally in the field of software for industrial machinery.
Since then, this small company based in Lodi has enjoyed continuous successes related to innovative products and cutting edge "best in class" technologies in the field of industrial automation, as proven by the many patents filed during the years as well as the important awards given to it by the Chamber of Commerce of Milan and of the Lombardy Region.
    The company, thanks to its successes over time, has grown considerably, expanding its sales network abroad and opening another company in China to manage the sales flow in the Asian market. 
    Ever attentive to the dynamics and needs of the automation market, constantly evolving and continually seeking technological innovation, Ever Elettronica has been able to respond to all the technological challenges that have arisen over the years, providing solutions able to make its customer's machines more and more performing and highly competitive.
    And it is precisely to underline the importance and the uniqueness of every single customer that we design, with care and dedication, highly customised automation solutions, that are able to perfectly meet any request, both regarding software and hardware.
    Our team of mechatronic engineers can indeed customise the software with specially designed firmware, and it can also adapt the motor by customising, for example, the length of the cables or the diameter of the crankshaft and the IP protection degree, all strictly based on the customer's technical specifications.

CE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical EquipmentCE Ceretificate 2 Phase Step Motor Bipolar Chopper Driver for Medical Equipment