Products

2*8 Color Coded Micro Type Fiber Optic PLC Splitter

China 2*8 Color Coded Micro Type Fiber Optic PLC Splitter, Find details about China Micro Type, PLC Splitter from 2*8 Color Coded Micro Type Fiber Optic PLC Splitter

Model NO.
2: 8
Trademark
HNK or OEM
Transport Package
Carton
Specification
RoHS
Origin
Shenzhen, China
HS Code
85414000
Model NO.
2: 8
Trademark
HNK or OEM
Transport Package
Carton
Specification
RoHS
Origin
Shenzhen, China
HS Code
85414000

Planar Light wave Circuits (PLC) splitters are manufactured using silica glass waveguide circuits and extremely
precise alignment of optic fibers in very small package. They split or combine light from one or two incoming
fibers to multiple numbers of outgoing fibers.

They perform uniformly over a wide spectral range, with ultra-low losses. splitters are highly compact, reliable
and available in very wide range of fiber and connector types. All PLC splitters are fully compliant with the
Telcordia GR-1209 & GR-1221 standard.

Splitters contain no electronics and use no power. They are the network elements that put the passive in
Passive Optical Network and are available in a variety of split ratios, including1:2, 1:8, 1:16, 1:32,1:64,2:8,
2:16, 2:32 & 2:64.

Standard Compliance
.   Telcordia GR-1221-CORE-1999 & GR-1209-CORE-2001
.   TIA/EIA-568B.3 Fiber Optic Cabling Components Standard
.   IEE802.3z Standards for Fiber Optic Cabling
.   RoHS Certified for European Market Requirements

Features & Benefits
.   Low insertion losses, High Uniformity, High Reliability, High directivity.
.   Ultra-broadband performance (1250-1650nm)
.   Low Polarization Dependant Loses (PDL) and Polarization Mode Dispersion (PMD)
.   1 or 2 input channels and up to 64 output channels
.   Ultra small, easy installation, suitable for all applications
.   Available with all type of packages and connectors
.   Ready for use in uncontrolled environment

Telcordia 1209 & 1221 Test results:

Name of the testConditionDuration
Temperature- Humidity aging85°C and 85% RH7 days
Vibration10 - 55Hz, 1.52mm double amplitude, in three axes1 hour
Component Impact TestImpact of 500g (mass<=0.125kg), 1ms , half sine pulse2 impacts
Temperature Cycling Test-40°C to + 70°C , Ramp rate: 1°C /min, Dwell time >15min10 cycles
Temperature- Humidity cycling-40°C to + 85°C , between 10°C and 23°C - 85% RH, at 85°C -20%RH,
between 23°C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH		14 days
Water Immersion43 ± 2°C , PH 5.5 ± 0.57 days
Fiber Side Pull test0.23 kg load, 90° angle , 2 directions5 seconds
Fiber Side Pull test0.45 Kg load for Single Input Fiber , 1.5 Kg load for
8 Fiber Ribbon Outputs		5 seconds


Specifications

1 x N
ParameterUnit1 x 2 1 x 4 1 x 8 1 x 16 1 x 32 1 x 64 
Insertion Loss Max. dB3.8 7.0 10.4 13.9 17.2 22.0 
Channel Uniformity Max. dB0.6 0.5 0.5 1.4 1.6 2.5 
Polarization Dependent Loss Max. dB0.2 0.3 0.3 0.3 0.3 0.3 
Wavelength Dependent Loss Max. dB0.3 0.3 0.3 0.3 0.3 0.3 
Temperature Dependent Loss Max. dB0.5 0.5 0.5 0.5 0.5 0.5 
Connector Dependent Loss Max. dB0.2 0.2 0.2 0.2 0.2 0.2 
Operating Wavelength Min.-Maxnm1250 ~ 1650 
Return Loss Min. dB55 
Directivity Min. dB55 
Operating Temperature °C -40 ~ + 85 
Storage Temperature °C -40 ~ + 85 
Maximum Input Power Max. mW 500 
Fiber Type - ITU G.652D or G.657A 
 
2 x N
Parameter Unit 2 x 2 2 x 4 2 x 8 2 x 16 2 x 32 2 x 64 
Insertion Loss Max. dB4.0 7.3 10.7 14 17.5 22.5 
Channel Uniformity Max. dB0.8 1.0 1.0 1.5 1.8 3.0 
Polarization Dependent Loss Max. dB0.2 0.3 0.3 0.3 0.3 0.4 
Wavelength Dependent Loss Max. dB0.3 0.3 0.3 0.3 0.3 0.3 
Temperature Dependent Loss Max. dB0.5 0.5 0.5 0.5 0.5 0.5 
Connector Dependent Loss Max. dB0.2 0.2 0.2 0.2 0.2 0.2 
Operating Wavelength Min.-Max. nm1250 ~ 1650 
Return Loss Min. dB55 
Directivity Min. dB55 
Operating Temperature °C -40 ~ + 85 
Storage Temperature °C -40 ~ + 85 
Maximum Input Power Max. mW500 
Fiber Type - ITU G.652D or G.657A 

Ordering Information
Using the available configurations amend/create product codes using the formula below.
Part Number: PLC-ABC-DEF-GHI
 

Ordering Guide

AInput Port1=1 Port, 2=2 Ports
BOutput Port02=2 Ports, 16=16 Ports, 64=64 Ports
CPackaging TypeT=Steel Tube Type, B=Boxed Type, M=Micro Type
DDiameter of Input Fiber09=0.9mm, 20=2.0mm, 30=3.0mm
EInput Fiber Connector typeFP, SP, SA, LP (As noted in Connector type code chart )
FInput Fiber Length10=1M, 15=1.5M, 20=2M
GDiameter of Output Fiber09=0.9mm, 20=2.0mm, 30=3.0mm
HOutput Fiber Connector typeFP, SP, SA, LP (As noted in Connector type code chart )
IOutput Fiber Length05=0.5M, 10=1M, 15=1.5M, 20=2M


Connector Type Code

CodeConnector CodeConnector CodeConnector CodeConnector CodeConnector CodeConnector 
FPFC/PCFAFC/APCLPLC/PCLALC/APCMUMUDNDIN
SPSC/PCSASC/APCTPST/PCTAST/APCMTMTRJE2E2000


Ordering Sample

Part NumberDescription
PLC-108B-30SP05-30SP051*8 PLC splitter, boxed type package, input and output fiber Ф 3, length 0.5M, and connector SC/PC.
PLC-232M-09SP10-09SP102*32 PLC splitter, micro type package, input and output fiber Ф 0.9, length 1M, and connector SC/PC.

 

2*8 Color Coded Micro Type Fiber Optic PLC Splitter2*8 Color Coded Micro Type Fiber Optic PLC Splitter2*8 Color Coded Micro Type Fiber Optic PLC Splitter2*8 Color Coded Micro Type Fiber Optic PLC Splitter2*8 Color Coded Micro Type Fiber Optic PLC Splitter2*8 Color Coded Micro Type Fiber Optic PLC Splitter
 

You Might Also Like