Automatic High Productivity Thermoforming Plastic Cup Lid Tray Making Machine
China Automatic High Productivity Thermoforming Plastic Cup Lid Tray Making Machine, Find details about China PP Cup Cover Making Machine, Cup Lid Forming Machine from Automatic High Productivity Thermoforming Plastic Cup Lid Tray Making Machine
Basic Info.
Punch Speed
15-40 Times/Minute
Max. Forming Size
480*225mm
Max. Forming Depth
Max. Forming Depth
Material
PVC, Pet, PS
Stoke
60-230mm
Total Power
10.5kw (380V)
Weight
2.3ton
Trademark
CSM
Specification
3300*860*1800mm
Origin
China
Punch Speed
15-40 Times/Minute
Max. Forming Size
480*225mm
Max. Forming Depth
Max. Forming Depth
Material
PVC, Pet, PS
Stoke
60-230mm
Total Power
10.5kw (380V)
Weight
2.3ton
Trademark
CSM
Specification
3300*860*1800mm
Origin
China
Product Desciption
Product Description
Machine Introduction
Automatic Plastic Lids & Covers Forming Machine is developed by our research and development personnel according to the demand of packing market. This machine is a new type product developed in light of pharmaceutical standard GMP and food standard QS. Machine adopts a fully automatic flow covering blow molding or plastic sucking molding, punching and diet cutting as the special properties of product requires of the users. It is with advanced technology, safe and simple operation, which will avoid the consumption of labor on the manual punching and contamination from the touch with the employee. therefore, the quality requirement is secured during the production.
Machine Features
1) The machine realizes automatic control through the combination of programmable controller (PLC), man-machine interface, encoder, photoelectric system, etc., and the operation is simple and intuitive.
2) The mechanical transmission adopts the reducer and the main rotation connection. Forming, punching, pulling, and punching stations are on the same axis to ensure operational synchronization (reduced transmissionerror)
3) Plate type upper and lower preheating device temperature control system is stable to ensure uniform heating, various molding methods to ensure the appearance of the product is beautiful, mechanical traction is stable and reliable, punching and punching knife are durable and no burr, mold replacement is simple, main engine adopts the frequency conversion speed regulation to run smoothly.
4) The whole body is welded by steel box, the structure is firm and no deformation, the bracket and the box are under pressure molding, high density and no air holes, and the appearance is evenly wrapped with stainless steel, which is beautiful and easy to maintain.
Product Paramenters
Details Images
This machine applicable to the plastic sheet such as PVC, PET, PS, to making cup lids, covers, small plates. It can be achieved only by replacing the mold.
Why Choose Us
FAQ
Q1:Are You Manufactory or Trade Company?
A: We are the 100% Manufactory specialized in thermoforming indurstry for plastic disposable packaging over 10 years with 1,000 square meters workshop area, located in Huzhou, Zhejiang Province, which it's 2 hours by car from Shanghai Pudong Airport to our factory. You are warmly welcome to visit our factory.
Q2: What is the material you used? Is it food grade or eco friendly?
A: The main materials we used is PLA, PET, PP, PS, PVC, PC All the materials we used is food grade and eco friendly which pass ROHS, GRS, SGS,ISO9001,ect., EXCEPT PVC. PVC is not food grade materials. Mainly used to pack electronics and harware.
Q3: Can you provide OEM and ODM services?
A: Yes. About OEM, you can customize machine such as printing your logo on, color and packaging. About ODM, our factory has a professional team with rich experience in the design and manufacture of plastic forming machines.Just tell us your idea and we will help to find the optimal solution.
Q4: Is there quality control when manufacturing the lines?
A: Certainly, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, making treatment on the roller surface and shaft, assembling, testing and packaging.
Q5: What's your strength comparing to the other supplier?
A: We'll supply you the best quality and service and provide you with good advice beyond your requirements. The lines are easily for installation with low maintenance requirements.
Machine IntroductionAutomatic Plastic Lids & Covers Forming Machine is developed by our research and development personnel according to the demand of packing market. This machine is a new type product developed in light of pharmaceutical standard GMP and food standard QS. Machine adopts a fully automatic flow covering blow molding or plastic sucking molding, punching and diet cutting as the special properties of product requires of the users. It is with advanced technology, safe and simple operation, which will avoid the consumption of labor on the manual punching and contamination from the touch with the employee. therefore, the quality requirement is secured during the production.
Machine Features
1) The machine realizes automatic control through the combination of programmable controller (PLC), man-machine interface, encoder, photoelectric system, etc., and the operation is simple and intuitive.
2) The mechanical transmission adopts the reducer and the main rotation connection. Forming, punching, pulling, and punching stations are on the same axis to ensure operational synchronization (reduced transmissionerror)
3) Plate type upper and lower preheating device temperature control system is stable to ensure uniform heating, various molding methods to ensure the appearance of the product is beautiful, mechanical traction is stable and reliable, punching and punching knife are durable and no burr, mold replacement is simple, main engine adopts the frequency conversion speed regulation to run smoothly.
4) The whole body is welded by steel box, the structure is firm and no deformation, the bracket and the box are under pressure molding, high density and no air holes, and the appearance is evenly wrapped with stainless steel, which is beautiful and easy to maintain.
Product Paramenters
| Punch Speed | 15-40 times/minute |
| Max. Forming size | 480*225mm |
| Max. Forming depth | 47mm |
| Material | PVC, PET, PS |
| Stoke | 60-230mm |
| Compressed air | 0.6-0.8Mpa |
| Mold cooling | 20ºC, 50L/H, tap water / recycle water |
| Total power | 10.5Kw (380V) |
| Main motor power | 2.2Kw |
| Material Packing Size | Material sheet: 0.15-0.6*510mm, Roll: 75mm |
| Overall dimension | 3300*860*1800mm |
| Weight | 2.3Ton |
Details Images
This machine applicable to the plastic sheet such as PVC, PET, PS, to making cup lids, covers, small plates. It can be achieved only by replacing the mold.
Why Choose Us
On Service
1. One year guarantee for whole machine.
2. Technical support by e-mail.
3. Send engineers to customers' factory to teach customers how to install and commissioning the machine.
4. Have a remote diagnostic system so that we can repair the electrical parts remotely.
1. One year guarantee for whole machine.
2. Technical support by e-mail.
3. Send engineers to customers' factory to teach customers how to install and commissioning the machine.
4. Have a remote diagnostic system so that we can repair the electrical parts remotely.
On Product
1. Supply standard products to customers.
2. Supply standard products under customers' brands and packaging, etc.
3. R&D department develops any new products together with the customers.
1. Supply standard products to customers.
2. Supply standard products under customers' brands and packaging, etc.
3. R&D department develops any new products together with the customers.
FAQ
Q1:Are You Manufactory or Trade Company?
A: We are the 100% Manufactory specialized in thermoforming indurstry for plastic disposable packaging over 10 years with 1,000 square meters workshop area, located in Huzhou, Zhejiang Province, which it's 2 hours by car from Shanghai Pudong Airport to our factory. You are warmly welcome to visit our factory.
Q2: What is the material you used? Is it food grade or eco friendly?
A: The main materials we used is PLA, PET, PP, PS, PVC, PC All the materials we used is food grade and eco friendly which pass ROHS, GRS, SGS,ISO9001,ect., EXCEPT PVC. PVC is not food grade materials. Mainly used to pack electronics and harware.
Q3: Can you provide OEM and ODM services?
A: Yes. About OEM, you can customize machine such as printing your logo on, color and packaging. About ODM, our factory has a professional team with rich experience in the design and manufacture of plastic forming machines.Just tell us your idea and we will help to find the optimal solution.
Q4: Is there quality control when manufacturing the lines?
A: Certainly, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, making treatment on the roller surface and shaft, assembling, testing and packaging.
Q5: What's your strength comparing to the other supplier?
A: We'll supply you the best quality and service and provide you with good advice beyond your requirements. The lines are easily for installation with low maintenance requirements.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......