10'' 5 micron Pre Filtration Melt Blown Sediment PP Water Filter



General Description
PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Applications
Drinking Water Treatment
Electronic
Industrial Water Treatment
Plating
Chemicals, solvents

Features
Three layers structure cartridge offers high dirt holding capacity, longerservice life
Formed by thermal bond without using any binders and adhesives.
100% Pure Polypropylene will not cause any pollution to water
Wide Chemical compatibility
Groove design to extend the filtration surface area.
All kinds of adaptors are available.
FDA compliance material

Specifications

Dimensions:
*Outside Diameter: 63mm, 115mm or up to customers' request
*Inside Diameter: 28mm, 30mm
*Length: 9.75", 9.87", 10, 20, 30, 40, 50, 60

Material of Construction:
*Filter media: PP
*End caps: PP
*Cores: PP
*Gaskets/O-ring: Silicone, EPDM, NBR, Viton

Performance
*Removal Rating: 1, 3, 5, 10, 25, 50, 100, 150 μ M
*Maximum Differential Pressure: 2.0 bar @ 21 degree C
*Maximum Operating Temperature: 82degree C





PP Melt Blown Filter Cartridge P/N:
DLPP-× -*-=-#-+-&(e. G., DLPPMG-5-10-M-S)
CodeX Surface Type
Blank No Groove
G Deep Groove
MG Mini Groove
Code* Outside Diameter
Blank 2.5"(63mm)
BB 4.5" (115mm)
Code= Removal Rating
1 1µ M
3 3µ M
5 5µ M
10 10µ M
25 25µ M
50 50µ M
75 75µ M
100 100µ M
150 150µ M
Code# Length
975 9.75" (248mm)
987 9.87"(250mm)
10 10"(254mm)
20 20"(508mm)
30 30"(762mm)
40 40"(1016mm)
50 50"(1270mm)
60 60"(1524mm)
Code+ End Cap Type
Blank DOE(No End Caps)
F DOE(Glasket/Glasket)
M 222/Flat
P 222/Fin
T 226/Flat
T 226/Fin
Code& Seal Material
S Silicone
E EPDM
B NBR
V Viton