China Brand New 165HP Gr165 Motor Grader with Ripper

China Brand New 165HP Gr165 Motor Grader with Ripper, Find details about China Grader, Liugong Grader from China Brand New 165HP Gr165 Motor Grader with Ripper

Basic Info.

Model NO.

GR165

Rated Power

125kw

Maximum Lift Above Ground

450mm

Maximum Depth of Cutting

550mm

Min. Turning Radius

7.3m

Trademark

newindu

Transport Package

Nude

Specification

8036*2380*3240mm

Origin

China

HS Code

84292090

Model NO.

GR165

Rated Power

125kw

Maximum Lift Above Ground

450mm

Maximum Depth of Cutting

550mm

Min. Turning Radius

7.3m

Trademark

newindu

Transport Package

Nude

Specification

8036*2380*3240mm

Origin

China

HS Code

84292090

Product Desciption

China brand new 165HP Gr165 Motor Grader with Ripper

Product description

The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

Advantages and Highlights:

1. The GR165 adopts Dongfeng Cummins 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.

2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

3. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.

4. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

5. The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.

Technical parameter

Basic specification
Engine model	D6114
Rated power/speed	125kW/2300rpm
Dimension(LxWxH)	8900×2625×3470mm
Operating weight(Standard)	15000kg
Performance specification
Travelling speed ,forward	5,8,11,19,23,38 km/h
Travelling speed ,reverse	5,11,23 km/h
Tractive force(f=0.75)	77KN
Max. gradeability	20%
Tire inflation pressure	260 kPa
Working hydraulic pressure	16 MPa
Transmission pressure	1.3~1.8MPa
Operating specification
Max. steering angle of front wheels	±50°
Max. lean angle of front wheels	±17°
Max. oscillation angle of front axle	±15°
Max. oscillation angle of balance box	15
Frame articulation angle	±27°
Min. turning radius using articulation	7.3m
Biade
Maximum lift above ground	450mm
Maximum depth of cutting	500mm
Maximum blade position angle	90°
Blade cutting angle	28°-70°
Circle reversing rotation	360°
Moldboard width X height	3965×610mm