Products

Chocolate Chip Molds Silicone Rubbers RTV

China Chocolate Chip Molds Silicone Rubbers RTV, Find details about China Silicon, Silicon Rubber from Chocolate Chip Molds Silicone Rubbers RTV

Model NO.
HY-E6 series chocolate chip molds silicone
Sticker
Available
Sample
Available
Minimum Order Quantity
200 Kilogram
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Type
Addition Silicone Rubber
Mixing Ratio
1:1
Pot Life/Working Life
30-40 Minutes
Trademark
Hong Ye Silicone Rubber
Transport Package
20kg/Drum; 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
China
HS Code
39100000
Model NO.
HY-E6 series chocolate chip molds silicone
Sticker
Available
Sample
Available
Minimum Order Quantity
200 Kilogram
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Type
Addition Silicone Rubber
Mixing Ratio
1:1
Pot Life/Working Life
30-40 Minutes
Trademark
Hong Ye Silicone Rubber
Transport Package
20kg/Drum; 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
China
HS Code
39100000

chocolate chip molds silicone rubbers RTV 
 

Features 

good tensile strength 

good tear strength 
Stripping the gender is good, 
Linear shrinkage rate low, 
Size stability is good

 

Application of chocolate chip molds silicone rubbers RTV :

Especially suitable for the molding manufacture of UPR and other craft products, mold making silicone.

Description :

Item namechocolate chip molds silicone rubbers RTV 
Material100% FDA or LFGB silicone
Colorany pantone color is ok
Design shapecustomer's design
UseDIY Tool for make cake ,soap
FeatureNon-stick, Non-toxic, easy for release
Temperature-40°C to 250°C
Certification FDA / LFGB /ROSH/ SGS Report
Packing Detail each pc in a OPP bag
Payment term T/T , western Union
Other Product silicone wristband, jelly watch, slap watch, LED light for bike
Company Web http://wendy-rl.en.made-in-china.com

Chocolate Chip Molds Silicone Rubbers RTV

Technical Parameters

Model        E620#
Appearance        Translucent
Mixing ratio          1:1 or 10:1
Viscosity (cps)        7000±2000
Pot life (mins)        20-40
Curing time (25ºC) hrs         3-5
Hardness(Shore  A)         20
Tensile strength (MPa)         4.7
Tear-strength  (kN/m)         14±2
Shrinkage (%)         <=0.1
Elongation(%)         520


Frequently asked questions of molding silicone rubber

Why does the silicone rubber mold have few molding times?

 The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. 

 

Why does the silicone mould appear to be dry outside but wet inside? 
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.

Solution: Add 0.05% water into the silicon rubber and Stir over a low speed briefly when you use it.

 

Call Us Anytime With Questions About Your Application. 

More information , pls feel free to contact Ms Hebbe:
 

Mob():008618938861889

Tel:+86-755-89948019

 

 

Web:wendy-rl.en.made-in-china.com

You Might Also Like