China Xpon Ont for 2 LAN Port and Pot, Find details about China Xpon ONU, Gpon Epon WiFi ONU Ont from Xpon Ont for 2 LAN Port and Pot
ITEM | UNIT | SPEC | |
OPTICAL | Working wavelength | nm | PON:TX1310,RX1490 |
TX POWER | dBm | 1-4(EPON & GPON) | |
RX Sensitivity | dBm | ≥ -27 | |
optic connector | / | SC/UPC | |
OTHER | WIFI | / | 802.11 b/g/n 2.4GHz 300Mbps |
TYPE | / | HGU | |
POWER | V/A | AV110~255V→DC12V 1A | |
Operating temperature | ºC | -5~40 |
INTERFACES | Introduction |
ON/OFF | Power switch button |
Power | Power input interface, DC 12V/1A |
Optical | XPON fiber interfaces, using SC/UPC fiber access |
GE, FE | LAN service interface, GE is a gigabit port, and FE is a 100 Mbps port. |
Reset | Reset button |
WLAN | WIFI switch |
Indicator | Status | Description |
Power | ON | The device is powered on normally. |
OFF | The device is not powered on. | |
PON | Twinkling | Received light, device not registered |
ON | The ONU is connected to the OLT and registered successfully. | |
OFF | No optical received, device not registered | |
LOS | Twinkling | Fiber break or optical power exceeds the limit |
OFF | ONU accepts normal optical power | |
GE, FE | ON | The network port is connected but no data is transmitted. |
Twinkling | The network port has a data transmission | |
OFF | The device is not powered on or the network port is not connected to the terminal device. | |
WIFI | ON | WIFI works fine |
Twinkling | WIFI has a data transmission | |
OFF | WIFI works abnormally | |
Internet | ON | Successfully connected to the Internet |
OFF | Not connected to the Internet | |
OPT | OFF | RF output level is within the normal range |
ON | RF output level is not within the normal range |