Products

Dhs Three Zones Thermal Shock Test Chamber

China Dhs Three Zones Thermal Shock Test Chamber, Find details about China Thermal Shock Test Chamber, Enironment Test Room from Dhs Three Zones Thermal Shock Test Chamber

Model NO.
DHS-CJ2
Trademark
DERWAS
Transport Package
Wood Box
Specification
70*60*60
Origin
China
HS Code
8514109000
Model NO.
DHS-CJ2
Trademark
DERWAS
Transport Package
Wood Box
Specification
70*60*60
Origin
China
HS Code
8514109000
General description:
 The thermal shock test machine is used to test the chemical structure changes caused by thermal expansion and contraction in the shortest time by testing the material structure or composite material in a transient environment of extremely high temperature and very low temperature. Or physical damage. Applicable objects include metals, plastics, rubber, electronics, etc., which can be used as a basis or reference for their product improvement.

Characteristics:

1. The two-box equipment is divided into two parts: the high-temperature zone and the low-temperature zone. The test product is placed in the basket. When the impact is raised, the test product is moved into the high-temperature zone or the low-temperature zone for weighing, and the test product is dynamic.

2. The touch control interface is easy to operation.

3. Impact mode apply the air path switching mode to introduce the temperature into the test area and do the thermal shock test.

4. When the high temperature impact or low temperature impact, the maximum time can reach 999 hours, and the maximum cycle time can reach 9999 times.

5. The system can be used for automatic cycle or manual selective shock.

6. Cooling and adopting binary refrigeration system, the cooling effect is fast, and the cooling method is water-cooled.

7. Can not test the impact normal temperature


Specification 

 
Model 

DHS-CJ2-42

(A~C)

DHS-CJ2-80

(A~C)

DHS-CJ2-150

(A~C)

DHS-CJ2-252

(A~C)

DHS-CJ2-450

(A~C)

Inner size W*H*D(cm)

40*3*30

50*40*40

60*50*50

70*60*60

80*75*75

Outer size W*H*D(cm)

140*180145

148*190*155

160*200*175

175*210*187

190*220*200

Temp range(150ºC~A:-45ºC;B:-55ºC;C:-65ºC);( High temperature zone :+60ºC~+150ºC; Low temperature zone :-10ºC~-65ºC;)

 
Heating time (heat storage zone)≤5min / ≤10sec
Cooling time (cool storage zone)±0.5ºC / ±2.0ºC

Defrost cycle

1000times

Inner/Outer materia

The whole machine is SUS 304# stainless steel plate matte treatment, the inner box is stainless steel

Insulation materia

High temperature resistant high density ethyl chloroformate foam insulation material

System

P.I.D+S.S.R+Microcomputer balance temperature control system

Cooling system

Semi-closed double-stage compressor (water-cooled) / fully enclosed double-stage compressor (air-cooled)

Safety protection system

Fuseless switch, compressor high and low voltage protection switch, refrigerant high voltage protection switch, fault warning system, electronic alarm

Accessories

View window (special purchase type), two adjustable upper and lower compartments, energized line hole, caster, horizontal bracket

Power supply

AC 3 phase 380V 50HZ/60HZ 

Controller

7 inch touch screen

Compressor

France/s "Tecumseh" Brand


Factory Information :

Dhs Three Zones Thermal Shock Test Chamber
Wuxi DHS Test Equipment Technology Co.,Ltd. (DHS) has been synonymous with the pursuit of excellence and customer service for over 16 years. As a leader in the fields of manufacturing, engineering, testing, and technical services, DHS has gained national recognition. The Company is headquartered in Wuxi city, Jiangsu province, China.

Our main products included temperature humidity test chamber, benchtop environmental test chambers, salt spray corrosion test chambers, weathering testers, IP dust and rain chambers, ozone climatic test chamber, SO2 noxious gas test chamber, walk in chambers and so on.


Product Detail 


Dhs Three Zones Thermal Shock Test Chamber
Dhs Three Zones Thermal Shock Test Chamber
Dhs Three Zones Thermal Shock Test Chamber
Dhs Three Zones Thermal Shock Test Chamber




Company Exhibition Show 


Dhs Three Zones Thermal Shock Test Chamber



Our Serivice 

- OEM ODM available
- Bidding project service (document preparation:Business part & technical part etc.)
- 1 Years Warranty, Lifelong Follow-up Services;
- Training how to install, operate and maintain the machine, and calibration service before shippment;
- Response within 2 hours once got questions from customers, send spare parts within 1 days after got notice;
- Engineers service on site to install and commissioning overseas.

Contact Us for Professional Solution & Best Quotation!!
 

 

You Might Also Like