Graphite electrode is made of high quality calcined petroleum coke,imported needle coke and modified coal asphalt,the grade are RP,HP and UHP graphite electrodes,the specification is Ø75-700mm.
     Graphite electrode produced by our company has the advantages of low resistivity,high electrical conductivity and thermal conductivity,good oxidation resistance,good thermal shock resistance,high mechanical strength,easy to machine,etc.
     Graphite electrode is widely used to smelt the steel,alloy steel and other metal or nonmetal material in electric arc furnace.

Packing with wooden case and pallet,and enlace with baling band.

1. Use special hoist tools to hoist graphite electrode. It is strictly forbad to prize electrode ends up with crowbar. It must be handled with great care during transport to avoid being struck.
2. Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry.
3. Carefully checking before making connection, make sure that socket and nipple thread is not damaged, nipple pitch plug is in.
4. Blow the nipple and socket threads with compressed air.
5. It must be dried in the furnace before use, the drying temperature in the furnace should be less than 150ºC,the  drying period should be more 30 hours
6. Graphite electrode must be connected and contacted closely and straightly.Use moment spanner for connecting electrode with suitable force. Mustn't decline.
7. The holding device must hold the electrode tightly, good contact and no arc.
8. To avoid the electrode breakage, put the large materials in lower part and small materials in the upper part. Insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.