UHP700 L2700mm Graphite Electrode 

Introduction
graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace.

UHP Graphite Electrode Specification

 

Graphite Electrode

Artificial graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch. after calcining, burdening, kneading, forming, baking and pressure impregnation, graphitization and then precision machined with professional CNC machining. such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure, good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace.

Product Parameters

Characteristics
Our graphite electrodes are with low electric resistance, high density, high anti-oxidation capability, precise machining accuracy, especially with low sulphur and low ash will not give steel second time impurity.


Application

Used in EAF and LF for steel making, as well as in electric smelting furnace for producing industrial silicon, yellow phosphorus, etc.

Notes of usage

1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque.
5.To avoid electrode broken, please remove the insulating material in the furnace.
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper.