CAST IRON PILLOW BLOCK BEARINGS

FKD^® Pillow Block Bearing (UCP205 UCF206 UCFL207 UCT208 UCFC210) 

Application Fields
Agricultural machinery, Construction equipment, Conveyor systems, Textile machines and Mining machines etc.
Products Information Bearings and Housings Matching Table Design
Cast Iron Mounted Bearing Units
FKD Cast Iron Mounted Bearing Units are manufactured UNDER ISO9001 certified facilities.FKD Mounted Bearing Unit housings are made from high strength cast iron. The housings are designed with normal/solid base construction and reinforced bolt hole areas. FKD Mounted Bearing Unit product line is available in many different housing styles with various attachment methods and positions.
The insert bearings' inner ring, outer ring and balls are produced using vacuum degassed 52100 bearing steel. These components are heat treat hardened to produce a durable wear surface on the balls and ball tracks. FKD uses cold rolled steel for ball retainers and shields.
The insert bearing features a labyrinth sealing system that is comprised of a metal backed nit rile rubber excluder seal that is designed to keep grease in and contaminants out. The seal is protected by steel flinger installed in front of the seal contact surface with the inner ring. This flinger, due to centrifugal force during bearing rotation, effectively slings moisture and contaminants away from the seal area. The seal is designed to allow used grease to purge past the seal into the channel between the seal and the flinger when new lubricant is carefully replenished.
All FKD Mounted Bearing Units are factory lubricated using GREAT WALL grease with about 30-40% grease fill.

Relubrication
Lubrication
Insert bearings in FKD Cast Iron Mounted Bearing Units have sufficient high-grade grease installed after assembly. There is no need for replenishment during initial operation in new installations. FKD bearing units normal grease content is about one third to one half of the internal space inside the bearing.
Re-greasing
The performance of a bearing is greatly influenced by the quality and quantity of the grease. FKD recommends GREAT WALL/ SHELL grease. In order to avoid over filling, it is advisable to replenish the grease in small amounts. A hand grease gun should only require a few pumps per bearing for most sizes and conditions. Over lubrication is a major cause of bearing failure. Over filling can increase heat build-up in the bearing during operation which can lead to premature failure. Over filling can dislodge seals and flingers from their mounting position thereby interfering with the rotation of the bearing or destroying the integrity of the seal.
FKD bearings are lubricated with GREAT WALL from the factory. The grease used for replenishment should be checked for compatibility before application.
Lubrication Intervals
Bearing units are generally relubricatable from the factory. Depending on the operating conditions, relubrication on the bearings is not always necessary where environments are clean and temperatures are low. It is normal to see a small amount of grease at the edge of the flinger during and after operation. Grease deteriorates overtime and should be replenished. Lubrication intervals are a function of the environmental conditions coupled with the operating temperature. General lubrication intervals are shown in THE ACCOMPANYING CHART. There is no substitution for recommendations by the equipment manufacturer and/or observation by operators to determine the appropriate lubrication cycles.

Company Profile
Hebei Hailan Bearing Manufacture Co., Ltd( was originally founded in 1988 as Xingtai Honghai Bearing Manufacture Co., Ltd)  is the most professional manufactuer of Pillow Block Bearings in the north of China.It is located in  LinXi county, HeBei Province, China, the hometown of bearing.

The company mainly produces UC, HC, UK, SER, SA, SB, AGRI-BEARING and various of bearings, and all kinds of bearing housings P, F,  FC, FL, T , CC, pH, PA, FA, FB, HA, LF,ect.

Advanced CNC, grinding and assembly equipment ensures the precision .
Professional testing laboratory strickly test and control the quality of raw materials and finished products.

FKD Bearings constantly promote the quality, expand the market.
Products have exported to North Amercia, South Amercia, Eastern Europe, Southeast Asia, Africa, Middle East, Eastern Asia, Western Europe more than 40 countries and regions.




Macy
+8615532107076