Products

Drying Machine for Tubular and Open Wide Fabric Processing

China Drying Machine for Tubular and Open Wide Fabric Processing, Find details about China Textile Machine, Dryer Machine from Drying Machine for Tubular and Open Wide Fabric Processing

Demension
12880X4800X4500mm/17100X4800X4500/21330X4800X4500
Power
99.5/147.5/191.5kw
Power of Oil Heater
100/120/150
Dn Oil/Steam
Dn125/Dn100/Dn150/Dn125/Dn200/Dn150
Oil
720dcbm/1080dcbm/1440dcbm
Trademark
FINESTART
Transport Package
FCL
Specification
12880X4800X4500mm
Origin
Jinan, China
Demension
12880X4800X4500mm/17100X4800X4500/21330X4800X4500
Power
99.5/147.5/191.5kw
Power of Oil Heater
100/120/150
Dn Oil/Steam
Dn125/Dn100/Dn150/Dn125/Dn200/Dn150
Oil
720dcbm/1080dcbm/1440dcbm
Trademark
FINESTART
Transport Package
FCL
Specification
12880X4800X4500mm
Origin
Jinan, China
Drying Machine for Tubular and Open Wide Fabric Processing

Introduction
The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.
We provide corresponding machine according to different types of fabric to meet your requirements totally.
Based on the different width of belt, we could supply different models as following:
 FSHG-2000mm/2400mm/2800mm/3200mm(standard)/3600 mm
Based on the different heat sources, we could supply the following models with six heating methods:
1. Steam (0.8MPa) 2. Steam (2.8MPa) 3. Heat conduction oil 4.Gas (direct combustion) 5. Gas (indirectly) 6. Biofuels
Our machines are equipped with conveyor belt made of Teflon material, it could bear  high temperature and not pollute the fabric with non-staining.



Design Drawing
Drying Machine for Tubular and Open Wide Fabric Processing

Typical Products Information
Basic Info

ModelFSHG2800
NameRelax Dryer
ApplicationDrying the fabric,eliminating exceeding water and achieving the natural moisture content of the fabric
Suitable Fabricknitted and Woven Fabric 

Technical Dates

Max. Working Width2400mm
Machine Speed0-50m/min
Chamber Nos4 Sets
Power Supply380V·3P·50HZ
Weight of Machine≈24.5T
Working Type Three-layor net belt cycling
Net Belt TypeGlass fiber with PTFE coated
Driving Type for net beltPLC+Inverter control
Heat-setting TypeNatural Gas heating hot air circulating
Max Drying Temperature160ºC
Temp. control typeAutomatically regulate two chambers temperature as one section
Length of Chamber2.1M
Thickness of Insulation Board105mm
Machine DimensionL=12500mm  W=4500mm  H=3400mm

Cost & Consumption

NoItemMax.TempSpecificationConsumption
1Natural Gas160ºC P≈2Kpa - 3.5Kpa / 35544KJ /(8500KCal)/m³ 8-13m3/H·Chamber(6.5-10.5kg)
Electricity
NoItemSpecificationConsumption
1Chamberblower motor etc22KW/section
2Main Driving & ControlMotor etc16.5KW
Total Power94.5KW
Working Consumption≈40KW
Compressed Air source 
NoItemSpecificationConsumption
1Compressed Air0.35-0.6Mpa clean compressed air/
 
Other Products and Technology
Drying Machine for Tubular and Open Wide Fabric Processing


Production Line
Drying Machine for Tubular and Open Wide Fabric Processing
Drying Machine for Tubular and Open Wide Fabric Processing
Payment Terms:
Payment Conditions: 30% down payment by T/T and the balance payment should be TT or in irrevocable L/C at sight. 
Delivery time: 30-60 days from the date of receiving down payment. All payment should be received before delivery in China.
 
Any questions and requirments,contact us now!



   
  
   
  

 

You Might Also Like