Special Plating Circular Cutting Saw Blades for Table Saw
China Special Plating Circular Cutting Saw Blades for Table Saw, Find details about China Saw Blades, Blade Saw from Special Plating Circular Cutting Saw Blades for Table Saw
1) We're a direct manufacturer and 100% export worldwide (USA, Israel, Jordan, Iran, Thailand, Duabai, South Africa, Kenya, Egypt, Australia, UK, Spain, Brazil, etc)
2) We have around 15 years of producing experience.
3) Our drill product: HSS drill bits, masonry drill, SDS drill, glass&tile drill, step drill, wood flat drill, wood auger bit, wood brad drill, center drill, left hand drill, drill set etc.
4) Above 95% of customers will place a formal order after testing the samples.
SPECIAL ELECTRO PLATED TCT SAW BLADE
TCT Saw blades for grass cutting can help to cut hard grass and brush in the agricultural industry, farm, street plants greening, commercial landscape, residential garden care and others.
Bore:
Bore: Available all sizes upon your request, such as 5/8", 1", 20mm, 22mm, 23mm, 25mm, 30mm, etc.
Teeth: Teeth type and teeth number could be adjusted upon request.
Advantage:
The blade with insert lock can avoid the teeth off when hitting stone during grass cutting. It is safer than other kinds of grass cutting saw blades.
TCT Saw Blade For Cutting Grass
The blades are welded with an ATB tip. There are many holes in the body which can reduce the noise. The main body of the blades is made of superior quality spring steel (65Mn). It has characteristics of lightness, high efficiency, low noise and long-life etc. In order to avoid rust and make the surface more shiny, the blades can be plated with Nickel and Chromium etc. The blades are mainly suitable for cutting grass at golf courts, airports, football courts, in gardens, parks etc.
4 Kinds of TCT Circular Saw Blade as follows:
| Outer Diameter | Body | Hole | Teeth(mm) | |
| Inches | Metric(mm) | Thickness (mm) | Diameter(mm) | |
| 4" | 110 | 0.9-1.1 | 20 | 24T |
| 4" | 110 | 0.9-1.1 | 20 | 40T |
| 5" | 125 | 0.9-1.1 | 20 | 30T |
| 5" | 125 | 0.9-1.1 | 20 | 40T |
| 6" | 150 | 0.9-1.1 | 20/25.4 | 40T |
| 6" | 150 | 0.9-1.1 | 20/25.4 | 50T |
| 6" | 150 | 0.9-1.1 | 20/25.4 | 60T |
| 7" | 180 | 0.9-1.2 | 20/25.4 | 40T |
| 7" | 180 | 0.9-1.2 | 20/25.4 | 50T |
| 7" | 180 | 0.9-1.2 | 20/25.4 | 60T |
| 8" | 200 | 0.9-1.2 | 20/25.4 | 40T |
| 8" | 200 | 0.9-1.2 | 20/25.4 | 50T |
| 8" | 200 | 0.9-1.2 | 20/25.4 | 60T |
| 9" | 230 | 1.0-1.3 | 20/25.4 | 40T |
| 9" | 230 | 1.0-1.3 | 20/25.4 | 60T |
| 9" | 230 | 1.0-1.3 | 20/25.4 | 80T |
| 9" | 230 | 1.0-1.3 | 20/25.4 | 100T |
| 10" | 250 | 1.2-1.5 | 20/25.4 | 60T |
| 10" | 250 | 1.2-1.5 | 20/25.4 | 80T |
| 10" | 250 | 1.2-1.5 | 20/25.4 | 100T |
| 10 | 250 | 1.2-1.5 | 20/25.4 | 120T |
| 12 | 300 | 1.3-1.7 | 25.4/30 | 60T |
| 12 | 300 | 1.3-1.7 | 25.4/30 | 80T |
| 12 | 300 | 1.3-1.7 | 25.4/30 | 100T |
| 12 | 300 | 1.3-1.7 | 25.4/30 | 120T |
| 14 | 350 | 1.3-1.7 | 20/25.4 | 60T |
| 14 | 350 | 1.3-1.7 | 20/25.4 | 80T |
| 14 | 350 | 1.3-1.7 | 20/25.4 | 100T |
| 14 | 350 | 1.3-1.7 | 20/25.4 | 120T |
| 16 | 400 | 1.7-2.0 | 25.4/30 | 60T |
| 16 | 400 | 1.7-2.0 | 25.4/30 | 80T |
| 16 | 400 | 1.7-2.0 | 25.4/30 | 100T |
| 16 | 400 | 1.7-2.0 | 25.4/30 | 120T |
Saw Caution:
1. Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf, keeping flat will lead to alloy blade deformation.
2. Use time, does not exceed the maximum speed. Speed method of calculation is attached for information.
3. Use time, must take protective masks, gloves, helmets, working protection shoes, protective glasses.
4. During the installation Alloy saw, must firstly confirm the function, use of saw table, first read the statement of saw table. Avoid mistakes Install so as to cause the accident.
5. During the installation of Alloy saw, you must first check whether there is a split distortion, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully.
7. After installing the alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of the saw table saw, a gasket must be a good washer, and then gently hand to push the saw blade, confirmed the rotation whether the eccentric shaking.
RELATED PRODUCTS
PACKAGE
Carton box& blister package & wooden case as your demand
SHIPPING
1. TNT/FedEx/DHL/UPS for samples or under 45KG weight goods, Door to Door.
2. By Air or by Sea for batch goods, from airport(seaport) to airport(seaport).
3. Customers specifying freight forwarders or not.
4. Production Time: 3- 7 days for samples; 2-3.5 weeks for batch goods.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......