Products

Kl8m (H) Miner's Lamp Miner's Cap Lamp Miner's Safety Lamp

China Kl8m (H) Miner′s Lamp Miner′s Cap Lamp Miner′s Safety Lamp, Find details about China Miner′s Lamp, Miner′s Cap Lamp from Kl8m (H) Miner′s Lamp Miner′s Cap Lamp Miner′s Safety Lamp

Model NO.
KL8M(H)
Trademark
CNC
Specification
8.8Ah rated capacity
Origin
China
Model NO.
KL8M(H)
Trademark
CNC
Specification
8.8Ah rated capacity
Origin
China
KL8M(H) Miner's Cap Lamp Miner's Lamp Miner's Safety Lamp

1. Application and characteristic 
KL8M(H) is special illuminating lamp for workers carrying individually under mine.
This series is our new self-designed generation product. It adopts Li-ion battery, CREE LED double light sources, with smart size and light weight, free aintenance battery, and long life LED.
2.Working conditions:Temperature: -8-40ºC
3. Explosion-proof type: Exs I
4.Technical Parameter
FeaturesKL8M(H)  Specifications
Rated capability8.8Ah(li-ion battery)
Rated voltage3.7V
Continuous discharging time>26h
Main light LED Working voltage3.2V
Main light LED Working current0.35A
Main light Power3W
Main light Luminous flux>280Lm
lamp lighting degree (distance 1 meter)>10000Lux (at the starting time)      
>85000Lux (after 22 hours working time)
Main light Usage life hour>100000h
Accessory light Usage life hour100000h
Short circuit protect time<15ms
Usage duration of battery (recharges)1000 recharges (in reasonable working condition)
Charging time≤12hours
Weight <520g
Charing voltage and currentDC:4.2V  1000mA
5.Structure
  1. 1. This series lamp is portable, the lamp head and battery part are connected by cable's upper cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
  2. 2. A CREE- LED main light source is installed in, KL8M(H) , several LED auxiliary light sources. main source and auxiliary sources illuminate alternatively.
  3. 3. This battery case is designed with closed wear-ring, convenient for carrying.
  4. 4. This lamp head is designed with charging device, matching with charging set, convenient and reliable for charging.
  5. 5.PTC self-protection is set between battery group, and reusable short circuit protective device is set on cable's battery end. Thus, this is very safe and reliable.
6.Usage and maintenance
  1. 1 The battery is charged with more than 1/4 power when shipped out of factory, turn on the switch to make sure it can illuminate normally. If it was in good condition, charge and use it. 
  2. 2 Charge with matched charging set or unit charger.
  3. 3. Please turn off lamp when charging.
  4. 4. If any damage happened in using, give it to check department after leaving mine well, and maintain by professional person with special tool, don't open lamp yourself, especially under mine.
  5. 5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life of service would be reduced.
  6. 6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty, and restart the lamp, it will work normally.
  7. 7. If the lamp was not used usually, please charge per three months in storage period.
  8. 8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to affect normal warning.
7.Charging :
  1. 1.Charger input: AC100-240V,50-60Hz ,0.4A .
  2. 2.Charger output : DC :4.2V@1000mA
  3. 3.Connect to power supply, plug lamp head into charging socket, clockwise turn 180 degree to make charging points contact well, watch whether the indicator is normal. It will take 10-12 hours to be charged fully.

You Might Also Like