Technical Datas Of Uptodate Hydraulic Hose Crimping Machine KM-91C-6
| Crimp ranger: | 1/8"-2" IV |
| Standard voltage&motor: | 380V/4kW |
| Optional voltage&motor | 220V/2.2kW |
| Opening without dies | φ124mm |
| Opening | min 28mm |
| No.of standard die | 10 sets |
| Systematic Pressure | 30Mpa |
Standard Die Size Of Hydraulic Hose Crimping Machine KM-91C-6
| Standard Dies of KM-91C-6 |
| No. | Die No. | Die Bore(D) | Die Length(L) |
| 1 | Φ6 | 15mm | 65mm |
| 2 | Φ8 | 18mm | 65mm |
| 3 | Φ10 | 20mm | 65mm |
| 4 | Φ13 | 23mm | 65mm |
| 5 | Φ16 | 26mm | 65mm |
| 6 | Φ19 | 29mm | 65mm |
| 7 | Φ25 | 37mm | 65mm |
| 8 | Φ32 | 46mm | 78mm |
| 9 | Φ38 | 51mm | 78mm |
| 10 | Φ51 | 63mm | 78mm |
Advantages Of Hyraulic Hose Crimping Machine KM-91C-6:
1). Back reseting hydro-cylinder, can be easily operated;
2). Increasing the opening, and good passing performance;
3). Added with base-protective resin gasket to not damage the working surface;
4). Big swaging force, can easily crimp 2 inch 6 wires hose;
5). Function: manual,semi-automatic and automatic.
Applications Of Hydrauli Hose Crimping Machine KM-91C-6
1).Suitable for high precision pressing of low and high pressure hose diameter, starting from 1/8 inch to 2 inch internal hose pipe.
2).Used rubber hose to transmit hydraulic pressure as there working power.
3).Used in Building Construction, Petroleum Industry, Chemical Industry, Car and motor Industry.
Hydrauli Hose Crimping Machine Why Not Choose Kangmai?
1). Kangmai hose crimper has approved CE & ISO and audited by SGS.
2). The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason are like below:
(a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimp high pressure hydraulic hose, such as 4SP even 6SP.
(c)The technical of machine head is forging not cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.