Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668 )

China Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668), Find details about China Teroson PU Sealant, Sika Polyurethane Sealant from Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)

Model NO.
Surtek 3668
Characteristic
High Viscosity, High Shear Strength, Fast Cure
Promoter Composition
Complexing Agent
Composition
Organic Material
Color
Black
Density
1.20±0.05 Kg/L
Cure Mechanism
Moisture-Curing
Non-Sag Properties
Good
Shore a Hardness
~ 60
Shear Strength
≥ 5 N/mm^2
Tensile Strength
≥ 8 N/mm^2
Elongation at Break
≥ 400%
Tear Strength
≥ 10 N/mm
Tack-Free Time (23 ºC , 50% Rh)
20~40 Min
Rate of Cure (23 ºC, 50% Rh)
≥ 3.5 mm/24hrs
Trademark
Surtek
Transport Package
310ml Cartridge, 400ml, 600ml Sausage
Specification
SGS
Origin
China
HS Code
3506100090
Model NO.
Surtek 3668
Characteristic
High Viscosity, High Shear Strength, Fast Cure
Promoter Composition
Complexing Agent
Composition
Organic Material
Color
Black
Density
1.20±0.05 Kg/L
Cure Mechanism
Moisture-Curing
Non-Sag Properties
Good
Shore a Hardness
~ 60
Shear Strength
≥ 5 N/mm^2
Tensile Strength
≥ 8 N/mm^2
Elongation at Break
≥ 400%
Tear Strength
≥ 10 N/mm
Tack-Free Time (23 ºC , 50% Rh)
20~40 Min
Rate of Cure (23 ºC, 50% Rh)
≥ 3.5 mm/24hrs
Trademark
Surtek
Transport Package
310ml Cartridge, 400ml, 600ml Sausage
Specification
SGS
Origin
China
HS Code
3506100090

Description:
Surtek 3668 is a one component, solvent free, high strength polyurethane adhesive sealant. It is non-sag, curing fast, of good initial strength. It does not contain solvent or PVC. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.

Advantages:
One component, easy to apply
No sagginess, easy to apply in vertical surface
Fast cure
Solvent free
Aging resistant



Uses: 
Surtek 3668 is used for windshield direct glazing. It is widely used for structural bonding and installation for windscreen of car, bus, train, boat, ect.



Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)

                



Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)

Application:
1. Use Comensflex Activator to make the substrate surface clean, dry, free of dust or grease.
2. Shake Comensflex Primer bottle to make the material even before using it. Use brush to apply the primer onto the cleaned surface for a thin layer.
3. Apply the sealant after the primer dried. Install the glass before the sealant tack free. The best working temperature is 20-30°C, humidity 50-70%
4. The sealant cures with moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is. Too high temperature and humidity may cause bubble in the cured sealant.
5. Avoid the adhesive sealant from alcohol, acid, ammonia chemicals. These chemicals will cause the adhesive sealant uncured.


Technical Data Sheet of Surtek 3668:
AppearanceUniform Paste
ColorBlack
Density1.20 ± 0.05 kg/l
Tack-free time*20~40 min
Rate of cure*~3.5 mm per 24 hrs
Shore A hardness60±5
Tensile strength≥8 /mm2
Elongation at break≥400%
Tear strength≥10 N/mm
Shear strength (without primer)≥5 N/ mm2
Service temperature (continuous)
Short - term (up to 48 hrs)
-40°C to +90°C
130°C

Package:
Cartridge: 310ml/cartridge, 20 cartridges/carton
Sausage: 400ml/sausages, 600ml/sausage, 20 sausages/carton
Drum: 200L/drum


Storage and Shelf Life:
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well.


Company Profile:
Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)
Production Base:Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)
Cleaning: Comens, a full range of solutions for multiple industries.Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)
Certificates:Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)
Cooperation:Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)

FAQ
Solvent Free PU (polyurethane) Car Body Structural Bonding Glazing Sealant (Surtek 3668)