Products

Two-Component Reusable Silicone Rubber for Infusion Bagging

China Two-Component Reusable Silicone Rubber for Infusion Bagging, Find details about China Colloidal Silica, Silicone Elastomer from Two-Component Reusable Silicone Rubber for Infusion Bagging

Model NO.
T640
Feature 2
Not Oily
Feature 3
No Bubbles
Different Packing
5/20/25kg in One Drun
Trademark
utek
Transport Package
Drum
Specification
A Grade
Origin
China
HS Code
3910000000
Model NO.
T640
Feature 2
Not Oily
Feature 3
No Bubbles
Different Packing
5/20/25kg in One Drun
Trademark
utek
Transport Package
Drum
Specification
A Grade
Origin
China
HS Code
3910000000
Product Description

Two-component silicone, platinum-curing/ addition-cure type, flowable, vulcanizes at room temperature or heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
 

Application

Suitable for molding variety of products in large quantity, such us art crafts, furniture, prototyping, architectural elements, garden ornaments, tire, soap, candle, jewelry, vacuum bagging ,wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, concrete, cement, stone, GRC/GFRC, jewelry etc. 
 

Two-Component Reusable Silicone Rubber for Infusion Bagging
Two-Component Reusable Silicone Rubber for Infusion Bagging

 

Product Parameters

 

Properties IndexTest Report
Before CuringAppearanceTranslucent fluid
Viscosity(cps)7000±3000
(Adjustable)
OperatingMixing Ratio
(By weight)		1 :1
Operating Time(25ºC  /min)30~50 
(Adjustable)
Curing time (hr, basically cured)3~5 
(Adjustable)
Curing time (hr,
perfectly cured)		12
After CuringHardness (shore A)40±2
Tear strength (kN/m)15+4/-3
 
Tensile strength (Mpa)7.0+2/-1.0
Shrinkage (%)≤0.1
Elongation (%)300~450
Density (g/cm)1.02
Processing method
 
  1. Mix part A and pars B evenly with 1:1 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
  1. Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and
waste silicon rubber.
 
  1. Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture  successfully, so as to ensure that there
will be no bubbles in the finished mold.

2) This step is less than 10 minutes. Otherwise, it
Will cause cross-linking reaction, and no more
further steps will be available.
 
  1. Pouring casting or Brush molding
Notes:1) For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air.
  1. For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and easy to brush.      
  2. We suggest to set the mold for another 12 hours after demould before put it into large production.
Packaging & Shipping
 
Two-Component Reusable Silicone Rubber for Infusion Bagging
Two-Component Reusable Silicone Rubber for Infusion Bagging
Two-Component Reusable Silicone Rubber for Infusion Bagging

 



 

You Might Also Like