Products

Galvanized Steel Floor Deck Roll Forming Machine

China Galvanized Steel Floor Deck Roll Forming Machine, Find details about China Steel Floor Deck Roll Forming Machine, Galvanized Steel Floor Deck Roll Forming Machine from Galvanized Steel Floor Deck Roll Forming Machine

Model NO.
WLFM
Coil THK
1.5~3.0
Roller Station
16
Power of Main Motor
18.5kw
Power of Hydraulic
5.5kw
Shaft Dia.
80mm
Material of Roller
Gcr15/D2
Material of Cutter
Cr12
HRC
58-60
Wall Plate THK
20mm
Cutter THK
40mm
Trademark
WILLINGIN′T
Transport Package
Wooden Cases
Specification
CE& ISO9001
Origin
China
HS Code
84552210
Model NO.
WLFM
Coil THK
1.5~3.0
Roller Station
16
Power of Main Motor
18.5kw
Power of Hydraulic
5.5kw
Shaft Dia.
80mm
Material of Roller
Gcr15/D2
Material of Cutter
Cr12
HRC
58-60
Wall Plate THK
20mm
Cutter THK
40mm
Trademark
WILLINGIN′T
Transport Package
Wooden Cases
Specification
CE& ISO9001
Origin
China
HS Code
84552210
Components for the Machine:
The roll forming machine consists of 10-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table

Technical Parameters 
Material SpecificationAluzinc steel and galvanized steel.
ThicknessWLFM51-326.5-980, 0.75 mm to 1.5mm;
WLFM75-300-900, 0.75mm to 1.50mm.
Main Motor Power22kw (two sections of machine, each secton has one motor with 11kw).
Hydraulic Station Power5.5kw.
Feeding Width1200mm
Cover Width920mm
Steel StressG450 ~ G550.
Roll Forming Speed12 m/minute.
Cutting Tolerance+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Hydraulic UncoilerMax. capacity: 10'000kgs.
Coil Inner Diameter508mm.
VoltageAs per customer's request.
Numbers of Stations26 stations
Type of CuttingRoll-formed and length-set profile cutting.

 Material of Main Equipment
Roller MaterialHigh grade S45C forged steel, coated with hard chrome; some important roller wheels are chosen Cr12 mold steel, coated with hard chrome.
Active Shaft MaterialHigh grade S45C carbon wrought steel, diameter 85mm.
Electric ElementsPLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider Electric, Germany.
Cutter bladesCr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
 
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
 
Packaging & Shipping

1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.

FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
 

You Might Also Like